| Go back to previous topic | | Forum name | Manual Trans - NV-T350 | | Topic subject | don't know jack about clutches. please help?!! | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i34&topic_id=1813 |
1813, don't know jack about clutches. please help?!!
Posted by my_red_eclipse96, Nov-29-03 09:37 AM
wheres the bleed screw?!! clutch has no pressure after refilling fluid resi. does someone have a pic or good instructions as to where it is and how to bleed it. thanks.
|
1814, RE: don't know jack about clutches. please help?!!
Posted by WickedESi, Nov-29-03 12:12 PM
The bleed screw is on the slave cylinder (the little guy with the boot between the tranny and the radiator.
Just get a bleed tube (you can get one from any auto parts store), and fill your resivor with DOT 3 brake fluid.
While a helper is in the car, open the bleed screw, have him push the pedal all the way down (and hold it there). Then close the bleed screw. Then have him/her let the pedal up. Repeat this process until tno air, and pure clean fluid comes out.
| |