Everything sold in multiples of 5 dollars. Pics available on request, prices do not include shipping + paypal cost, that will be determined at time of sale based on weight of item. I have a 96 parts car that if anyone is interested in oe parts that your willing to pull you can have them for next to nothing. The car is about to head to the salvage yard. Car still has full catback on it, most (95%) of manual tranny swap parts, rear disc brake conversion, tons of interior parts in gray (all seats, center console w/ armrest and shift boot, no cupholder though). Shoot me a pm if your interested, I dont have a lot of time right now to dedicate to pulling parts thus i'll make it dirt cheap if you pull them yourself. All sensors are believed to work as the car was in running condition when they were pulled, but i have no way to verify. I have to assume since there was no CEL when the car was last drove that they work ok, just wanted to make that disclaimer.

steering wheeel lower cover 5$
pcv hose and valve (runs from mani to valve cover) 5$
Power steering fluid sensor 5$
oil filter base (no mounting bolt) 5$
round pin knock sensor 5$
2 x oil pressure sending unit 5$
2 x front o2 sensor 97-99 10$
1 x front o2 sensor 95-96 5$
stock spark plug wires 5$
hood latch base/support 5$
valve cover powder coated silver (did not come out as expected, cover in great shape but not a show quality powder coat) 15$
oil pan (with plug, no dents) 20$
stock injectors (1 o ring missing, 65k of usage) - 10$
injector subharness - 15$
door speakers already in factory mounts, memphis audio Studio CO 2 way speakers w/ cross over - 20$
block capacitor thing above starter 5$
gray kick panels 10$
oil dip stick and tube 5$
driverside tranny mount - 10$
oil pickup tube - 5$
lower coolant hard line (comes out of water pump outlet) - 5$
95-96 starter - 5$
A/C compressor - 5$
power steering pump - 10$
ps pump bracket - 5$
alternator bracket - 5$
round pin crank position sensor - 10$
tensioner with grenade pin installed - 5$
idler pulley w/ bracket - 5$
inner timing belt cover - 10$ (no cracks, great shape)
outter fuse box cover - 5$
inner fuse box cover - 5$
ASD and FP relay w/ bracket - 10$
round pin coil pack - 10$
3x gray power mirror switches - 5$
brown power mirror switch - 5$.
gray fog light switch - 5$
stock throttle body w/o sensors - $10
2 x idle air controller - 10$
throttle position sensor - 10$
crank timing sprocket - 10$
driverside axle - 15$
cross member - 5$

400whp or bust.

I will take the inner timing belt cover. how much for shipping to 44305?

-MIKE-

Stroked 2.2L

Any info on the PS pump? Mileage etc.?

Edit: Also, what's this look like?

inner fuse box cover - 5$

Thanks Chad.

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

it says hood latch base/support

you get the actual hood latch to right?

do u got a front bumper ? for a 97-99 eclipse

Mike - 5 bucks should cover standard mail and paypal. If you want express mail its probably about 1.50 more

Brian - PS pump has a tick over 50k on the dial. The inner fuse cover is the one located by your left leg when your driving, just above the foot rest. Covers all the fuses for the inside electrical stuff.

Tuner - if you need the latch part that actually releases grip of the hood then yes i still have it, i just took it off b/c someone needed the entire cable from cabin to fascia.

Korn - the parts car has a 95-96 front end.



BTW my paypal ID is Mrblunt2gnt@gmail.com. Thanks guys.

400whp or bust.

Chad,

I'll take the injector sub harness. Let me know about payment.

Thura

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

can i get the front right passenger side wheel hub and bearing? how much to windsor,ct 06095?

Wheel hub/bearing isnt avail man, sorry.

Thura you've got pm mang.

400whp or bust.

I think Im going to need....Pics?

ASD and FP relay w/ bracket - 10$
cross member - 5$
oil pan (with plug, no dents) 20$
valve cover powder coated silver (did not come out as expected, cover in great shape but not a show quality powder coat) 15$
oil pressure sending unit 5$
pcv hose and valve (runs from mani to valve cover) 5$

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

If you need pics I can get you some this evening when I get home. I'll be working until 10pm est. I'll pm you with what I may already have pics of.

400whp or bust.

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

The kick panels and 1 oil pressure sending unit.PCV Valve and adjoining hose. Please P.M. me your paypal info and final price.

-Custom Hahn Racecraft Stage 2 Kit.
-Hahn FMIC
-2.5 Downpipe (Upgrading to 3")
-270cc injectors (Upgrading to 550cc)
-16g Turbo/8 lbs (Upgrading to 17lbs with mechanical boost controller)
-Custom FPR (Upgrading to S-FMU)
-Wiesco 8:8:1 CPR Pistons
-Eagle H Beams
-ARP Main/Head studs
-Centerforce dual friction stage 3
-Dyno Tune Comming Jan-07...

Hey Chad, do you have the inside mirror guts covers? That little triangle sail pannel thing? If so I need it, the whole thing, the outer piece and then the little cover piece that snaps into it. Do you still have the ashtray? There may be a few more bits and pieces I need too, but let me know...

I edited to the wiki!

Is that oil pan tapped for an oil return line by any chance?

ill take the foglight switch! comes with the little bezel around it right? it aint just the button is it? either way, just tell me where to send them 5 dollahs!

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

Ed - the fog light switch is just the switch, no bezel (and which color, gray or brown). My paypal ID is Mrblunt2gnt@gmail.com

clipse - oil pan is not tapped, its unmolested. So far HipHop requested it first, if hes not interested your on deck if you like.

Kirby - I have neither buddy, they went a while back. Most of the interior is available but I sold those a ways back. Sorry mang.

BigNasty - Kick Panels and 1 oil pressure sending unit is yours. HipHop requested the PCV hose first, if hes not interested your on deck.


SOLD and shipped today

Thura - injector sub harness
ballin boi13 - 1 97-99 front o2 sensor


Here are some pics of requested parts so far, I'll try to get the rest of them this evening. Sorry for any delays, the oil pan is not at my house.


Asd and FP relay, 2 oil pressure sending units and the PCV hose




Front 02 sensor




Inner Timing Belt Cover




Latch Support and Inner Fuse box cover




Center Console




Valve Cover




Speakers in factory mount




Throttle Body




Kick Panels




Mirror Switch




Lower Steering Wheel Cover




Lower Radio Din Pocket - 5$ (I forgot to add this to the list above)

400whp or bust.

Brian is correct, prices listed above are the cost of the item only. Shipping and paypal fee is added on top of it. More than likely shipping will be less than 5-6 bucks, not the case for things like A/c compressors and PS Pumps that weigh a friggen ton.


Brian the fuse cover is pictured above with the latch support. If you need another pic closer let me know.

400whp or bust.

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

Ah, I actually kind of wanted it tapped for an oil return line. I don't know how to weld so I am trying to send stuff out to get welded as little as possible. Main reason I was interested if it was tapped is that you wouldn't have to worry about shipping it. I live in Cincinnati and go up to OSU to visit friends all the time.

hmm i dk, can i attach the fog light button to my RS bezel which is just puggled? or are the button and the bezel one piece? ima install my 2gb fogs soon, and i want it to look stock!

Ed my car came with fogs so i'm not sure bro, you may wanna pop it out and see. Its easy to pull out. Even if it cant be removed its nothing a dremel wouldnt make quick work of, its just plastic. Let me know mang, i'm down for whatever.

400whp or bust.

will do!

I will take the lower radio bin and the door speakers from you!

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

Mr Blunt. I need a total price to send you because I dont know how much your charging for shipping. Can you please PM that to me. If so, I'll get the paypal out by lunch.

-Custom Hahn Racecraft Stage 2 Kit.
-Hahn FMIC
-2.5 Downpipe (Upgrading to 3")
-270cc injectors (Upgrading to 550cc)
-16g Turbo/8 lbs (Upgrading to 17lbs with mechanical boost controller)
-Custom FPR (Upgrading to S-FMU)
-Wiesco 8:8:1 CPR Pistons
-Eagle H Beams
-ARP Main/Head studs
-Centerforce dual friction stage 3
-Dyno Tune Comming Jan-07...

has anyone claimed that mirror switch yet?

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

Brian, Jeromy and Alex you all have PM's.

EZ noone has claimed the mirror switch yet. You need gray?

400whp or bust.

Not stealing your thread but i also have a parts car that i am done with just let me know what little peices you need and ill let you know if i have them the only thing i've really mess'ed with was the motor. i also have 2 spare block and a bare head if anyone needs.

96 GS - 5 Speed
E-bay Cool Air Intake(Short Ram-Add'd K&N Filter)
High Flow Cat
MSD Coil & Wires - NGK Plugs
E-bay Header and Down Pipe
Metal Shifter Barrings-Energy Shifter bushings
Custom 2 1/2 Cat back
Stage 1 Clutch & Tranny
Front&Rear Sway Bars
S-Afc II
55MM TB
17" Alloy Wheels(Gun Metal)
Metalic grey paint-97-99 Conversion-Turbo spoiler
Custom Painted Interior
Rebuilding Engine as of 8-27-06

Yo mang! ima take the forggie switch, i popoed the bezel out and seems like i can take the lil covers off, lemme know how much total to send ya. in grey btw.

Edit: just realized u have rear brake conv. parts, gime a good delio on EVERYTHING i need so i can just screw it on, im not realy knowledgable but im sure i can just swap em in. just lemme know aight?

I sent PM back!

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

400whp or bust.

Ed - 8.50 should cover paypal and shipping. Its gonna be snail mail at that price. My paypal ID is above.

Jeromy - got your pm,i'll have something for you by tomorrow. I went to see Oakenfold last night in Columbus and i'm still recovering. I got mucho sick...damn alcohol.

400whp or bust.

Give me a total price shipped to 31313 for the valve cover. I may interested in the valve cover and i have the money in hand to pay via paypal.

99 RS-T
"New bottom end(8.6:1 w/long rods)"
Turbonetics 60-1/Portfueler/etc!!!!!

If you would send a pic to distort5595@hotmail.com or post a pic of the oil pan please.

Thanks,
Dirk

Have the power steering tensioner bolt?

I <3 boost

i will take the knock sensor and crank position sensor homie....what the total shipping to 45231 (cincy)..


thanks

Blake

Pm's went out. Pics sent....get back to me gents.

400whp or bust.

Sold:
injector subharness
Front o2 Sensor 95-96
Front o2 Sensor 97-99

Pending:
Dsmmyth : Power Steering Pump and Inside Fuse Cover
BigNasty : Oil Pressure Sending Unit, Kick Panels and PCV
Eclipse982nrRST : Timing Belt inner cover, crank sprocket
Ed : Gray Fog Light Switch
EZ : Gray Power Mirror Switch
Agression : Speakers and Din Pocket
HipHop : Oil Pan, Relays and ValveCover
Blake: Knock Sensor and Crank Position Sensor

All others who requested prices for items already pending will be contacted if the sale falls through.

That leaves :
steering wheeel lower cover 5$
Power steering fluid sensor 5$
oil filter base (no mounting bolt) 5$
oil pressure sending unit 5$
front o2 sensor 97-99 10$
stock spark plug wires 5$
hood latch base/support 5$
stock injectors (1 o ring missing, 65k of usage) - 10$
block capacitor thing above starter 5$
oil dip stick and tube 5$
driverside tranny mount - 10$
oil pickup tube - 5$
lower coolant hard line (comes out of water pump outlet) - 5$
95-96 starter - 5$
A/C compressor - 5$
ps pump bracket - 5$
alternator bracket - 5$
round pin crank position sensor - 10$
tensioner with grenade pin installed - 5$
idler pulley w/ bracket - 5$
outter fuse box cover - 5$
round pin coil pack - 10$
2x gray power mirror switches - 5$
brown power mirror switch - 5$.
stock throttle body w/o sensors - $10
2 x idle air controller - 10$
throttle position sensor - 10$
driverside axle - 15$
cross member - 5$
Full EGR setup (minus vac hose back to mani) - 5$

400whp or bust.

Do you still have the catback mentioned in the first post? If so, what kind, and how much do you want for it?

400whp or bust.

What's up yo, how much would shipping be on that driver side tranny mount to 99702 AK? Mine broke into two pieces lol...also, do you happen to have the bracket that bolts to the tranny with the studs for that mount as well?

-Xavier-
95 Eclipse RS-T...lost in the frozen tundra

I dont have the top of the tranny bracket, only the mount itself. I'll stick it in a box and get you a quote from USPS.com when i get home.

400whp or bust.

Sounds good, thx bro.

-Xavier-
95 Eclipse RS-T...lost in the frozen tundra

Sold:
injector subharness
Front o2 Sensor 95-96
Front o2 Sensor 97-99
Power Steering Pump
Inside Fuse Cover
Oil Pan
Relays
ValveCover
Speakers
Din Pocket

Pending:
BigNasty : Oil Pressure Sending Unit, Kick Panels and PCV
Eclipse982nrRST : Timing Belt inner cover, crank sprocket
Ed : Gray Fog Light Switch
EZ : Gray Power Mirror Switch
Blake: Knock Sensor and Crank Position Sensor
Xmasta : tranny mount

All others who requested prices for items already pending will be contacted if the sale falls through.

That leaves :
steering wheeel lower cover 5$
Power steering fluid sensor 5$
oil filter base (no mounting bolt) 5$
oil pressure sending unit 5$
front o2 sensor 97-99 10$
stock spark plug wires 5$
hood latch base/support 5$
stock injectors (1 o ring missing, 65k of usage) - 10$
block capacitor thing above starter 5$
oil dip stick and tube 5$
oil pickup tube - 5$
lower coolant hard line (comes out of water pump outlet) - 5$
95-96 starter - 5$
A/C compressor - 5$
ps pump bracket - 5$
alternator bracket - 5$
round pin crank position sensor - 10$
tensioner with grenade pin installed - 5$
idler pulley w/ bracket - 5$
outter fuse box cover - 5$
round pin coil pack - 10$
2x gray power mirror switches - 5$
brown power mirror switch - 5$.
stock throttle body w/o sensors - $10
2 x idle air controller - 10$
throttle position sensor - 10$
driverside axle - 15$
cross member - 5$
Full EGR setup (minus vac hose back to mani) - 5$

400whp or bust.

paypal sent my man...thanks

If you still have kick panels, I will take them.. PM me a price shipped to 37128 if that's the case.

yoyo, need that coolant hard line, only if i can get gthe heater core also. if your located near columbus or cleveland ill fly out and pick them up so i dont have to pay for shipping.

how much for power window switch shipped to 31419? and do you have both driver and pass?

I could use that PS pump bracket if you still have it... Thanks!

Sold:
injector subharness
Front o2 Sensor 95-96
Front o2 Sensor 97-99
Power Steering Pump
Inside Fuse Cover
Oil Pan
Relays
ValveCover
Speakers
Din Pocket
Knock sensor
crank position sensor



All PM's replied to. Lots of stuff left guys.

400whp or bust.

how much for driver side axle for manual trans shipped to 60073!! mine took a shit on me!!

TRUELY BUILT NOT BOUGHT!!!!!!!!!!!!!!!

Sold:
injector subharness
Front o2 Sensor 95-96
Front o2 Sensor 97-99
Power Steering Pump
Inside Fuse Cover
Oil Pan
Relays
ValveCover
Speakers
Din Pocket
Knock sensor
crank position sensor
throttle position sensor
knock sensor
Power steering pump bracket

I believe i've updated those who've purchased from me with points, if I haven't please get me in PM and i'll have you updated. Lots of good stuff left. Thanks guys.

400whp or bust.