My friend tried to do this and he fucked his alarm up. He took the power line from the neons and tapped it into the output for the parking lights that came out of the alarm. After that his alarm never worked!

Well I want to see if I can do this without screwing up my alarm. Would I need to use a relay??

Thanks.

www.cardomain.com/id/ashah000

im not sure how good this would be for neons anyways. find out how much power is sent to the lights, and then how much power the neons use.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

positve switching with positive parking lights

87 12volts
86 parking light wire (positive)
85 ground
30 output (positive)

negative

87 ground
86 ground
85 parking light wire input( positive )
30 output ( neg )

positive swtching with negative parking lights

87 12volts
86 12volts
85 p.l. wire input ( neg)
30 output ( positive )

neg

87 neg
86 12volts
85 p.l. input ( neg )
30 output ( neg )

dont forget to fuse the relay hope this helps

You can also get a latching relay from a DEI dealer, and use a button on your remote to turn the neons on and off

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)