Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Interior/Exterior Audio, Alarms, AV topic #8300
View in linear mode

Subject: "How to disable stock alarm?" Previous topic | Next topic
Ryan_HesMar-03-04 07:33 AM
Old School 2GNTer
3450 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8300, "How to disable stock alarm?"


          

All I want to do it simply disable the stock alarm. When I press the power lock button or the lock button on my remote...I don't want the green security light to come on and I dont want the alarm to be activated.

My problem is my alarm will go off at random...even tho nothing has happened.

My only way around it now is to open my door, then press in the doorjam sensor so the car thinks the door is closed...then lock it. The security light doesn't turn on, and its all good....but its a pain in my ass.

So..does anyone know of a wire that can be snipped or any way to disable the stock alarm?

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

WickedESiMar-03-04 07:18 PM
Donating 2GNT member
3090 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8309, "RE: How to disable stock alarm?"
In response to Reply # 0
Mar-03-04 07:19 PM by WickedESi



          

The ETACS (electronic time and alarm control system), which is located behind the interior fuse panel, controls the stock alarm. Since it controls the flashing, and will only do it if the alarm succesfully alarmed the answer to your question is no.

You can, however, disable the factory alarm and hook the security light up one of those varad LED's off eBay (comes w/ a circuit bored to make it flash w/ or w/o an alarm).

To disable the stock alarm refer to my post on this thread, http://forums.2gnt.com/dcboard.php?az=show_topic&forum=10&topic_id=3557&mesg_id=3557&listing_type=search

Good luck! emoji


Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
WickedESiMar-12-04 11:44 AM
Donating 2GNT member
3090 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8436, "RE: How to disable stock alarm?"
In response to Reply # 1




          

In response to your P.M. Ryan:

The best place to tap into that orange wire to disable the alarm, imo (also where I tapped into mine) is where the wires go from inside the cabin into door. Look inside near the fuse box, and look to the left, you'll have to peel off some covering, to expose the wires. Just use a t-tap, clip it on, and run a grounded wire to the terminal in the t-tap (easiest way imo).

This will COMPLETLY disable your stock alarm (stock keyless entry will still work if you have the brain still in it), no flashing security light, or anything. If your not going to install an aftermarket alarm, I suggest getting one of those ultra bright VARAD LED's off eBay, which are wired to flash when your car is turned off, (or to flash if you have an aftermarket alarm installed) because this is the #1 theft deterant.


Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
stoyboycsMar-12-04 05:55 PM
Member since Jul 21st 2002
280 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8440, "RE: How to disable stock alarm?"
In response to Reply # 2


          

could always just remove the siren maker(cant think of what its called at the moment) and the bulb on the interior....problem solved IM emoji

Chris

I was right there with him untill the light turned green.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
WickedESiMar-12-04 09:08 PM
Donating 2GNT member
3090 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8441, "RE: How to disable stock alarm?"
In response to Reply # 3




          

The siren maker is the stock horn, and your starter is killed when the stock alarm goes off.


Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
magicmanMar-15-04 03:35 AM
Old School 2GNTer
44 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8470, "RE: How to disable stock alarm?"
In response to Reply # 4




          

My factory alarm used to go off at random since the first day I got the car new. Lived with it for years. Found out that others had the same problem and fixed it. The problem is the hood sensor located by the headlight. Just disconnect the sensor and the rest of the alarm and remote doorlocks will work fine. Try that unless you want to disable because your putting in new alarm.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Interior/Exterior Audio, Alarms, AV topic #8300 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.026 seconds, executing 26 queries.