ok i bought 2 12" audiobahns today. question is, the sub has 4 holes, 2 for neg and 2 for pos. do i just wire my + speaker wire to one of hte + ones and then follow suit with the - or is there something different i must do here?
#7372, "RE: q on wiring of subs" In response to Reply # 1
yeah, go here as this should answer most of your questions: http://www.jlaudio.com/tutorials/wiring/index.html Look up how many ohms your amplifier can handle and wire the subs to the amp accordingly using the link. If you have any more questions, feel free to im me (bowlinggod294 on aim) or pm me.
winter project: custom t3/t4 turbo and some others
#7375, "RE: q on wiring of subs" In response to Reply # 2 Oct-16-03 12:54 PM by distort
i think its dual 4 ohms or something. dunno no sleep just got the subs. i just want them to work . the wire from my enclosure has a positive and negative, 2 diff wires, one for each sub. i cant just put them in the spots and leave the other two? or am i going to have to buy more speaker wire?
edit :i just checked them and its single 4ohm voice coil.
#7378, "RE: q on wiring of subs" In response to Reply # 4
if you have a 2 channel amp:
im assuming it will only stand up to a 2ohm minimum resistance (from the subs) per channel. right now you have 2 4ohm voice coils (VCs) to work with (per sub)....so...run some speaker wire like this: from the + terminal of one VC to the + terminal of the other on the other side of the sub. do the same for the negative terminals. now youve connected the VCs in parallel. then run the speaker wire from the + terminal at either one of the VCs to the + on the box connector. do the same for the negative (from one of the VCs to the box connector). so now all the +s and -s are "touching", going (in order) from one VC to the other to the box connector. now you have a total resistance of 2ohms at the box connecter, and you can wire that like you normally would to one channel of the amp. do the same for the other sub.
wheeeeew, that really didnt make any sense did it, lol! basically, you would wire it up like any single VC sub, you just add "jumpers" to the other coil, making sure to follow the "+" and "-" paths through to the other VC.
#7379, "RE: q on wiring of subs" In response to Reply # 5
Originally posted by SPL_Eclipse if you have a 2 channel amp: im assuming it will only stand up to a 2ohm minimum resistance (from the subs) per channel. right now you have 2 4ohm voice coils (VCs) to work with (per sub)....so...run some speaker wire like this: from the + terminal of one VC to the + terminal of the other on the other side of the sub. do the same for the negative terminals. now youve connected the VCs in parallel. then run the speaker wire from the + terminal at either one of the VCs to the + on the box connector. do the same for the negative (from one of the VCs to the box connector). so now all the +s and -s are "touching", going (in order) from one VC to the other to the box connector. now you have a total resistance of 2ohms at the box connecter, and you can wire that like you normally would to one channel of the amp. do the same for the other sub. wheeeeew, that really didnt make any sense did it, lol! basically, you would wire it up like any single VC sub, you just add "jumpers" to the other coil, making sure to follow the "+" and "-" paths through to the other VC.
hahaha told you you needed some pretty lil pictures
#7382, "RE: q on wiring of subs" In response to Reply # 5
i have single VC 4ohms. k forget about the 2 subs, im kinda getting the picture but still blurry. how would i go about just hooking up one sub then i can take it from there. i just dont want to blow anything. i have a + and a - wire coming from my amp and my sub has 4 terminals right next to each other, 2 reading - and 2 reading +, like --++. how do i wire that up?
#7387, "RE: q on wiring of subs" In response to Reply # 8 Oct-17-03 12:04 PM by distort
ill try to get one im working 6 straight 12hr shifts didnt have sleep yesterday so im just kinda in a blahhh state of mind heh . i wont have time to take a pic till sat. and i need my subs by then before i go to party in another city. this is only if i have film in my polaroid too. ill try or try to find a pic online somewhere and post it up. they are just audiobahn 12" subs, anyone else have them? they have the logo with the stripe by audiobahn on the front with chrome flames on the sub. the back of it has 4 connectors that u screw in and out with an allen wrench (after u slide wire under them). they are square and look like this
#7396, "RE: q on wiring of subs" In response to Reply # 14
Originally posted by 808dsmtuner okay i see what your talking about now you dont need to hook up both - or both + just bridge your amp and the run the negative to negative positive to positive
Are you talking about running them in Parallel? He needs to know what his amp is able to push. When you run two 4ohm subs in parallel and then bridge the amp. The amp is going to "see" a 1ohm load (2 ohms bridged). Alot of amps will blow up running it like that. Make sure you have an amp that is 1ohm stable.
Allan 2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)
#7400, "RE: q on wiring of subs" In response to Reply # 15
ok thanks a lot everyone i got them hooked up now. just ran a + to + and - to -. no big deal. but needless to say its a lil louder than my old system and my plastic screw that holds the string to my hatch went bye bye and my rearview mirror fell off. sux but its all good. its LOUD .
Search
Printer-friendly copy
0 Users in Chat
. the wire from my enclosure has a positive and negative, 2 diff wires, one for each sub. i cant just put them in the spots and leave the other two? or am i going to have to buy more speaker wire?
.