#5260, "I need the remote start wiring for a 99 GS eclipse?"
I've search and search and I could not find it. I have manual trans. eclipse 99 GS. I just bought a new lcd alarm with remote start. It says that it is safe for a manual trans car. Can somebody help me with the wiring? What about the clutch? How does it start the car without pressing the clutch? Thanks...
#5264, "RE: I need the remote start wiring for a 99 GS eclipse?" In response to Reply # 0
Here is another link for wiring. I have a RS on my manual, and i use some mercury switches on the shifer itslef, and on the e-brake lever, so that if the ebrake lever is down, it wont start, and if the shifter is in gear, it wont start. DONT use RS on a manual car without some sort of safety switch!!
#5278, "RE: I need the remote start wiring for a 99 GS eclipse?" In response to Reply # 3 Feb-10-03 05:00 PM by XtremeRS
Here is the switch on the shifter arm. There is already a hole in the arm itslef, and i just bent the metal mounting tab of the merc switch and bolted it to the shifter arm. Whenever the shifter is in 1st, 3rd, or 5, the remote start will not start, because the switch is wired up to tell the RS not to start.
Here is the pic of the switch on the E-brake lever rod. I just used a self-tapping screw and screwed it down to the rod that moves with the brake lever. So when the lever is down and not engaged, it sends a signal to the RS to not start.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)