I've search and search and I could not find it. I have manual trans. eclipse 99 GS. I just bought a new lcd alarm with remote start. It says that it is safe for a manual trans car. Can somebody help me with the wiring? What about the clutch? How does it start the car without pressing the clutch? Thanks...

http://www.bulldogsecurity.com/wires2/showmodels.asp?modelid=14734&Submit1=Get+Wiring+Details

i dont like giving advice on how to wire remote starts for manuals though, i dont think its safe. use the wiring guide at your own discretion please. ;)

i know for a fact that there are other people on this board that will tell you how to do it, so have patience.

Here is another link for wiring. I have a RS on my manual, and i use some mercury switches on the shifer itslef, and on the e-brake lever, so that if the ebrake lever is down, it wont start, and if the shifter is in gear, it wont start. DONT use RS on a manual car without some sort of safety switch!!

http://www.directechs.com/wtechsoft/doc/52495.txt\

I have pics of my setup if you need some ideas on how to do the mercury switches.

Can you please e-mail it to me? Thanks man...

Here is the switch on the shifter arm. There is already a hole in the arm itslef, and i just bent the metal mounting tab of the merc switch and bolted it to the shifter arm. Whenever the shifter is in 1st, 3rd, or 5, the remote start will not start, because the switch is wired up to tell the RS not to start.




Here is the pic of the switch on the E-brake lever rod. I just used a self-tapping screw and screwed it down to the rod that moves with the brake lever. So when the lever is down and not engaged, it sends a signal to the RS to not start.

Thanks man!!!:thumbsup just one thing, where did you get your mercury switch? laters...