I am going to attempt an install on a Viper 500HF alarm.is there any wiring diagrams etc. for Eclipses that can help me with this process?the Only thing i think i will have a problem with is the power lock wiring.Does anybody have some info on this? TIA

Green 95 GS 5-speed
Engine--PCP cold air intake,Greddy header,Accel 8mm wires,OBX custom exhuast.

Suspension/Brakes--Sprint 2' springs, KYB Gr2's, EBC Red Stuff pads,17" Konig Traffiks (silver), 215/45/17 Yokohama AVS ES100's, 15 dollar camber kit.

If I remember right, the power locks wires are behind the glove box.

If you have need the diagrams, email me and I'll give you some wire colors. It shouldn't be an extremely difficult install. Door locks are the hardest to get, cause they are behind the glovebox and not in the kick or column.

Good Luck to you!

J. Mykel Hill
SLAP Mid-West Event Coordinator

jmykel@slapshow.com

Certified IASCA Judge
Certified SLAP Judge

http://members.cardomain.com/audiophyl

2002 Sound, Looks, & Performance National Champion--Advanced Mitsubishi

This might help

http://www.bulldogsecurity.com/wires2/showmodels.asp?modelid=13911&Submit1=Get+Wiring+Details

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

Thanks for the help.for some reason if i hook up the "switched ignition" wire the alarm wont arm or disarm.also i found the brown wires, but I don't know which wire to hook to what.my alarm has a green wire and a blue wire for the locks, and then the car has a wire for lock, then un-lock.Any experienced DEI installers know?

Green 95 GS 5-speed
Engine--PCP cold air intake,Greddy header,Accel 8mm wires,OBX custom exhuast.

Suspension/Brakes--Sprint 2' springs, KYB Gr2's, EBC Red Stuff pads,17" Konig Traffiks (silver), 215/45/17 Yokohama AVS ES100's, 15 dollar camber kit.