| Go back to previous topic | | Forum name | Audio, Alarms, AV | | Topic subject | Viper Alarm Install | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i10&topic_id=4601 |
4601, Viper Alarm Install
Posted by UNSpooled95GS, Nov-24-02 11:01 AM
I am going to attempt an install on a Viper 500HF alarm.is there any wiring diagrams etc. for Eclipses that can help me with this process?the Only thing i think i will have a problem with is the power lock wiring.Does anybody have some info on this? TIA
|
4602, RE: Viper Alarm Install
Posted by audiophyl, Nov-24-02 11:17 AM
If I remember right, the power locks wires are behind the glove box.
If you have need the diagrams, email me and I'll give you some wire colors. It shouldn't be an extremely difficult install. Door locks are the hardest to get, cause they are behind the glovebox and not in the kick or column.
Good Luck to you!
|
4603, RE: Viper Alarm Install
Posted by WIKKI, Nov-25-02 02:38 AM
This might help
http://www.bulldogsecurity.com/wires2/showmodels.asp?modelid=13911&Submit1=Get+Wiring+Details
|
4604, RE: Viper Alarm Install
Posted by UNSpooled95GS, Dec-07-02 04:22 PM
Thanks for the help.for some reason if i hook up the "switched ignition" wire the alarm wont arm or disarm.also i found the brown wires, but I don't know which wire to hook to what.my alarm has a green wire and a blue wire for the locks, and then the car has a wire for lock, then un-lock.Any experienced DEI installers know?
| |