Well I was getting tired of a box sitting in the middle of my trunk so I decided to try my first fiberglass box. Here are the results. I made it about 1/2 inch too high so I had to dado out a place for my strut tower bar to fit. Then I just added some bracing to the top from the inside.

Tell me what you think...oh yeah I am probably going to paint the trunk area black thats why I chose that carpet.

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

Hey, I have the same problem too.. My box sits in the trunk and takes up all the space.. I def like the setup you have.. what size subs are you runnin 10's... I have 12's but I think that setup is what I might just do.. Thanks

Yeah I am running 2 10s.... It would probably work with 12s. You would just need to bring it out a couple more inches to get the volume right probably but it would work.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

damn.. nice job.. makes me want to spruce up mine some again..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

Here's a shot with the grills....I will post more when I get the amp rack done.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

how many layers of glass did you use?

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Look great!!! Defintely !

http://www.snappydsl.net/ctoledo/

>how many layers of glass did you use?


I used about 5 layers total and a gallon of resin.... Its really firm and has little to no flex. I then coated both sides of it with undercaoting/sound dampener.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

ok, this is just my ignorance showing but why did you use glass at all? I mean you have a sealed mdf box, with glass on the inside. Why you do dat fo?




stock 95rs=backroad rally champion

Lane Adams

1998 GST Spyder
1995 GSX
1995 TSI AWD

Cause the box was open ended. It wasn't a sealed box, the bottom was cut out to fit in that area and he fiberglassed the bottom end to seal it all up.

Oh, lol, my bad. I thought it was sitting forward of that metal ridge, but I see it now.




stock 95rs=backroad rally champion

Lane Adams

1998 GST Spyder
1995 GSX
1995 TSI AWD

Yeah I just built a frame for the fiberglass to attatch to out of MDF.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

cool man , I kinda like the way the strut bar is recessed into the box, real clean.



stock 95rs=backroad rally champion

Lane Adams

1998 GST Spyder
1995 GSX
1995 TSI AWD