Well I was getting tired of a box sitting in the middle of my trunk so I decided to try my first fiberglass box. Here are the results. I made it about 1/2 inch too high so I had to dado out a place for my strut tower bar to fit. Then I just added some bracing to the top from the inside.

Tell me what you think...oh yeah I am probably going to paint the trunk area black thats why I chose that carpet.

Hey, I have the same problem too.. My box sits in the trunk and takes up all the space.. I def like the setup you have.. what size subs are you runnin 10's... I have 12's but I think that setup is what I might just do.. Thanks

Yeah I am running 2 10s.... It would probably work with 12s. You would just need to bring it out a couple more inches to get the volume right probably but it would work.

Chad

damn.. nice job.. makes me want to spruce up mine some again..

Here's a shot with the grills....I will post more when I get the amp rack done.

Chad

how many layers of glass did you use?

Look great!!! Defintely :thumbsup :thumbsup !

>how many layers of glass did you use?


I used about 5 layers total and a gallon of resin.... Its really firm and has little to no flex. I then coated both sides of it with undercaoting/sound dampener.

Chad

ok, this is just my ignorance showing but why did you use glass at all? I mean you have a sealed mdf box, with glass on the inside. Why you do dat fo? :)




stock 95rs=backroad rally champion

Cause the box was open ended. It wasn't a sealed box, the bottom was cut out to fit in that area and he fiberglassed the bottom end to seal it all up.

Oh, lol, my bad. I thought it was sitting forward of that metal ridge, but I see it now.




stock 95rs=backroad rally champion

Yeah I just built a frame for the fiberglass to attatch to out of MDF.

Chad

cool man :thumbsup , I kinda like the way the strut bar is recessed into the box, real clean.



stock 95rs=backroad rally champion