I put everything together all the wires look all set imo. But i am not getting ANY power. What wires are the constant power and the accessory power? I replaced the fuse for it under the hood and am now lost and confused as to why it is not working. Help por favor If it makes a difference, i am putting a 99 eclipse head unit into a 95 Talon.

Well...first thing make sure it is grounded. I had the same problem on my install. I was using a wiring harness so I didn't have to cut the factory wires and it was wired wrong. I had to use a test light to find the correct wires.

Boy this would sure be a much more helpful post if I were able to remeber which wires were correct.


Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims

ok.. should be:
blue wire - power antenna
orange - illumination(when you turn your lights on the radio will dim, but only hook this up if the radio has this option, which im not sure of for stock)
yellow - constant 12v power
red - switched 12v power

and be sure to attatch the black wire to the body of the car, that is the ground.

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/