#95204, "re-install problems" May-20-06 01:29 PM by Malenko
well after pulling the kit thinkin turbotitan and I were swapping cars, I started putting it all back together only Ive hit a few snags:
I cant get to the oil sensor where you install the sending unit, a huge metal bar thingie aka a Crossmember is in the way . Im not in a shop and dont have access to a lift or an engine Hoist. How do I pull the sensor to install the unit? the more details the better
Next problem, I cant drop the oil pan to swap in the tapped one. A smaller metal piece is in the way that attaches to the bar in problem #1 I have 10 of the 13 bolts out, but as you know, thats not enough
Im sure more problems will follow but I need to conquer these before I'll have the joy of experiencing the rest.
To all those who want to post answers, be as detailed as possible and remember ; I do infact know what Im doing its just that my selection of tools has diminished.
The car is a 1998 Eclipse RS ATX transmission
PICTURE:
I can only work on my car during the weekends, and the sooner I get this done, the better