>well if you only have 20 lbs of fuel pressure on stock
>injectors, then that is why your car is not idleing. My guess
>is that you have the fpr hooked up incorrectly. make sure you
>have the regulator "out" line running to the return line, and
>the "in" line running to the fuel rail. If it is hooked up
>properly, then try turning that allen head adjustment screw in
>more. If the pressure doesn't budge at all, then I would bet
>that you have a faulty regulator.

Ok, thx for the input first off all

Yes it is hooked correctly. Out is goin to the fresh return line. In is goin right to the rail. I guess my real question is "If the ML is not sealing correctly will that cause the MAP sensor to cut my fuel to 20 lbs?" If not then my problem is else where. TIA

__________________________________________
~Chris
03 SRT-4