#83678, "RE: Spal window kit with stock switchs" In response to In response to 15
Originally posted by 96eclipse2nr it "appears" to be sealed..but its not. there is a white plug there that you have to move outta the way. believe me..weve all dealt with it. you can get the wires through you may have to add spacers to the assembly, and you may not. i had to add some to get the window to roll down. each car is different, even if its the same make/model/year. this is a universal kit...so some fit and finish will be required. it IS relitavely easy. its not stupid easy...like installing an intake or something...but not that difficult. i didnt think it was that bad. i could think of worse/harder things iv had to do.
i did add spacers,the largest ones were to big and the smaller ones were to small so i added one of those flat bommerring looking ones with the small one..i didnt mess with movin the white harness,but after i took off the fender and found the way to run it its ez now you just look for that crack beside the white harness and that will come out behind the kick panels..
i didnt get to start on the pass sideo en because the kit i got only came with 1 primary adaptor (#8) and i need one for each door..
_______________________________________ Parts im Looking for.
Black apillars,black door sills,drivers side fender cap(end cap),floor mats,CF shift boot and Ebrake cover
