I remember a while back some people were having issues getting their windows to line up right after swapping in power windows or new regulators. I've figured out how to adjust it so that it goes up and shuts correctly EVERY time.
After you get the regulators and windows in place, reinstall the mirror gusset and connect power and the switch. Leave ALL the bolts for the regulator and the upper stops loose. Roll down the window enough that you can close the door GENTLY! Shut the door and roll the window all the way up. It should self align quite nicely. From the inside (DO NOT OPEN THE DOOR AGAIN!) tighten the bolts holding the regulator in place. Then push the upper stops (the fuzzy covered brackets) down as far as they will go and tighten them in place. You should now be able to open and close the door and roll the window up and down without having to worry about it catching on the upper frame again!
I'll take pics and do a WIKI writeup when I do the drivers side
Caps Pics provided for refrence
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!