#22713, "RE: Are our cars considered to have multi-link (SALA) suspension front and rear?" In response to In response to 6
Originally posted by WickedESi Well w/ the stock ride height, stock components, etc... they are not handling machines, but w/ this setup you can make them one. Get stiff springs (adjusting the toe & camber properly is a given), stiff/adjustable shocks and all your body roll problems will be gone. Get beefy front and rear sway-bars and your understeer/cornering roll will be gone. Get polyurethane suspension bushings and all the looseness/slow repsonse time will be gone. Get upper/lower strut tower bars to make your car solid/less cornering roll.
actually.. stock they handle well.. just need better tires..
depending on what surface your driving on as well.. might not want to make the suspension so stiff your kidneys bleed.. that isn't helping you at all..
For less understeer.. get a thicker rear antisway bar or a thinner front antisway bar.
and if you want great handling.. don't lower it.. it f'cks up the dynamic caster/camber angles that are engineered into the suspension.. not to mention the passive rear steering.
Get a bit more dampening.. for street use.. don't get coil overs unless your spending $$$ on GAB's or Teins..
and as always.. like he says.. make the chassis as stiff as possible.. for the suspenion to work right, the chassis shouldn't be flexin..
-- WheatKing
-- DSM Junkie -- 4 - 1G talons 4 - Avenger/sebrings 1 - Jeep to tow em home when they break
