#22416, "RE: Flushing out old brake fluid??" In response to In response to 0
I would siphon out the fluid that is in the resevoir(turkey baster)and pour new in first. Then i would go to the right rear brake(farthest from the resevoir) and go through the motions of bleeding the brakes. I am pretty sure you will be able to tell when new/clean fluid is coming out. Keep an eye on the resevoir level as you do not want to get air in the system. Then move to the drivers rear and repeat. Next move to the passenger brake and finish with the drivers front. Top off the resevoir and you should be fine. I am not sure of the total system capacity, but it wouldnt hurt to have to large containers of brake fluid.
