All you have to do to run spark on the MS, is to mod the MS board. There are 3 LED's on the board, all controlled by the CPU. All they did was reconfigure the code that runs the CPU, to use the LED outputs to be 2 ignition driver outputs. Added a few 5v "pullup" resistors to the LED's, so it functions with a module to fire the coilpack(mitsu ignitor or HEI's) Added a spark table in the code, and presto.You also have to do the input mods to the board to the existing tach circuit, so it accepts the signal from the stock crank sensor.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)