#5256, "RE: Sensor pictures & required pigtails - COIL Pigtail" In response to In response to 0
The RockAuto and other aftermarket suppliers of the 3 pin connector for the Cam/Crank/VSS sensors come with 18 ga. wire. It is important to realize that pin 2 of the coil is the 12 volt supply wire, and the OEM harness has what appears to be 14 ga. in that location. Using the pigtail specified for the sensors in place for the coil is risky (high current through small gauge wire, resistance = heat, etc).
ModernPerformance sells the kit from the dealer, or you can buy the kit yourself if necessary.