Welcome to the 2GNT Forum! Interested In Advertising with 2GNT?
Home | Site Background| Info&Specs| Mods & Tech Info | CAPS | Part Reviews | Donate | 2GNT Stickers |
Search Printer-friendly copy Email this topic to a friend 3 Users in Chat
Top 2GNT Technical Performance/Engine Engine Management Systems & Controllers topic #3324
View in linear mode

Subject: "mega log view questions and dyno stuff" Previous topic | Next topic
xceler8Jul-19-07 05:52 PM
Member since Jun 03rd 2005
269 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#3324, "mega log view questions and dyno stuff"


          

Here's my thing, I got 440's in now, I did some dyno tuning on my car a few weeks back and I was just looking at my logs for it, I think my readings came in off some how, but it showed my injector duty cycle at like 103! Is that even possible?? I was at 193kpa at redline 7200 rpm's. The dyno read 10 psi of boost and 269.4 whp, my afr was at like 10.8 at redline as per the dyno graph and my aem uego. It showed up right on my ms, but not on mega log. My ms isn't corrected for barometric, so normal alt here it sits at about 96 kpa with the car off, so take off 96 kpa from my readouts and it gives me around 97kpa of boost. But my friggin afr was way off from what the dyno showed and what my gauge was reading me. It dipped down into like 8.8 afr, when my gauge was almost identical to the dyno at 10.8 at red.

So here's my things, anyone else have this issue? How do you correct for the kpa and barometric problem. cause if I had only 10lbs, then my ve map was all the way up to 191kpa with a lot of fuel added.

So this makes me think about how my ve map is all out of whack now to take in account of another almost 100kpa I need to add that isn't even in boost. What do you guys running high boost know about this issue? How about my 440's hitting 103 duty? And my afr showing like it is?

If I could get it corrected, and fix my friggin boost controller to let me go more than 10lbs. I will be upgrading my injectors to something bigger like a 780 or so. What do you guys think? Looking to go towards 16-20 lbs on my 60trim. I want to get it back ont he dyno with these upgrades soon and get the nx intercooler bar spraying next time around to give you guys some numbers and dyno charts fo what ms can do.

I also have a ignition problem right now too. I can't get that up and running, realy pissing me off! I think I have a burnt piece on my board by my x-11 and the serial connection. If anyone wants to take a look and can get some pics of it?

Thanks a lot, lots of stuff here, but have been doing a lot of reading and experimenting.

Peace-


Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote

mega log view questions and dyno stuff [View all] , xceler8, Jul-19-07 05:52 PM
  RE: mega log view questions and dyno stuff, xceler8, Jul-21-07 02:27 PM, #1
RE: mega log view questions and dyno stuff, Kirby, Jul-25-07 08:21 AM, #2
RE: mega log view questions and dyno stuff, BigRand, Sep-21-07 12:23 AM, #3
      RE: mega log view questions and dyno stuff, WickedESi, Sep-23-07 04:02 PM, #4

Top 2GNT Technical Performance/Engine Engine Management Systems & Controllers topic #3324 Previous topic | Next topic
Powered by DCForum+ Version 1.2
Copyright 1997-2003 DCScripts.com

I generated this page in 0.019709825515747 seconds, executing 15 queries.