#2806, "RE: Another Megasquirt question" In response to In response to 0
If you wanna control fuel (easily)
Grab your tach output from your ecu (or grab the crank sensor). Mod up the MS circuit board accordingly for the crank sensor.
Cut your injector harness, grab some bosch connectors from Napa and make your own connections to your injectors.
Wire them into the MS.
Drill/tap a new Intake temp sensor into your manifold ($15 part at Napa, Advance Auto) check msefi.com for details.
Add an additional Coolant sensor by teeing off you existing coolant sensor by using a NPT tee from a hardware store. (Coolant sensor also available at Napa, Advance Auto)