#2366, "RE: Sigh... I need help guys. I felt so sick of it all of a sudden!" In response to In response to 8 Aug-06-06 03:49 PM by XtremeRS
Yes, the hardware mods on that link.. Those mods need to be done in order to use the stock crank sensor as rpm/trigger input to the MS. If those mods were not done, then you would have to use the tach wire on the stock ecu to get rpm/trigger input to the MS. This is fine for running fuel only. To run spark, you would have to do those board mods, and use the crank sensor wire. If those mods were NOT done, then that is why its not running with the msq i sent you..Other than that, it should at least start and run..maybe not the greatest, but at least run..Did you do those board mods then? If so, then you need to put in on the decoder setttings, 420a decoder,and the rest of the options, are off-no settings. Msns setting would be fine if you did NOT do the board mods, and are using the stock TACH wire as input.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
