#1959, "RE: Any MS users have lean re-start issues?" In response to In response to 14
Originally posted by WIDECLIPSE
Originally posted by XtremeRS It only takes baro readings during resets, and power on, not when its running..
True. I was just reading up in the manual. It states however that you could run a separate baro meter and have the ms check it periodically. It also said that the ego correction starts after 30 seconds of the car being on and that it will +/- fuel after every 8 ignition events. That's probably why it takes a minute for it to stabalize. Hope that helps. edit: reading a little further into it, can you change the 'Ignition events per step' to a lesser number to help cure the problem faster? Instead of 8, could you make it 4 or something?
Yep, you can change the ignition events per step..go to "fuel tables1+3" at the top of the MT screen, and then go to "exhaust gas settings". You will see the step size box there. I run 16 igntion events per step, it seems to do the best around there. You run too many events like 8 per step, it can cause the ego correction to be too erratic. Too little events per step like 36 for example,and it will react too slow. Unless you are in a base tune, use 1% step size.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
