#2428, "RE: Problems keeping car running with MS" In response to In response to 10
Originally posted by gilee_8 Yeah, with that message, it can be two things. Either your MS and MT is not setup correctly so they are not compatible with each other, so they cannot talk to each other (which I thought in most of my post at the above link) And the other reason is the connection is no good. Which I found out that was my problem after 5 days. So, go through the entire post from the link given by XtremeRS, it should help. or at least give you some ideas on what to look for. Gil
Hey sorry its been awhile. Progress and then some set backs. I finally got rid of the error message sayint the ms and mt couldn't communicate we changed the configurations. But the MAP sensor is reading 67 KPa's with the car off. Now I have a 4 bar map sensor and the msq file has the pressure to 250 kpa I believe. But if you suck or blow on the vacuum hose with the car on the Map sensor doesn't budge. With the car on it went down a few KPa's but nothing major. The car still runs super rich and can not stay on without constantly giving it gas. Any suggestions?