Here is the pics. I have a small battery so that helps. As for the windshield washer fluid, I can run without it temporarily, I will just have to find a way to modify the stocker, or find a smaller one from another car and rig the shit out of it =P

Heater core I need to keep in, like I said I will just have to get a bigger hose or find a connector and use the ones of my fiances old talon to rig them so they are extra long to go around things. Also from Marks pics, it seems like mine may be a bit bigger, hard to tell through pics though.

Anyways here we are. Here is the throttle cable box. You can see that I moved it down. (the two bolt hole above it are where it was originally mounted) Also I switched the side the throttle cable was one, had to use a dremel to cut a whole out, but seems to work fine at the moment. If you look close enough you can see where I originally tried to mount it from the bottom but that didn't work.


Here is the other side you can see how impossible it would have been with a windshield wiper reservoir. You also can see the length of the heater hoses. I have the one connected.


Here is another view of the throttle cable mounted to the manifold. You can also see I had to split the loom to get the map/break booster sensor separated from the rest of the wire pack.


So this is where I am, hopefully things start to go smoother. Now if only I can find my electrical tape.

I'll try to update in an hour or so, feel free to txt/call me for more info etc. Numbers on the Rolodex if you dont have it.

97 Talon ESi 14.943@91.35MPH N/A!
"If you need someone to provide an itemized build of materials and a flowchart to walk you through every build-related question you will need to answer at each step of the process, you shouldn't be playing with cars. "-Driggs