#8565, "RE: Whats the trick to get trans back in after putting in mod. clutch" In response to In response to 0
Originally posted by teiger I put an FX300 clutch and flywheel on and that all went smoothly enough. Now I've been wrestling with getting the transmission back on. I took every mount off of it and even tried raising the engine a little. Is there something I'm missing? Also I think I messed my shit up because there's a little trans fluid leaking from where the drivers half shaft would go.
No worries there. If you angle her just so, more fluid could flow out.
Just a little confused. You do have a modular set-up on there correct? That doesn't get bolt on until you have the tranny mated to the block; then you bolt it up to the flexplate.
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
