K I need this car stripped... all i want is the frame left..(unless someone needs it)Sadly some parts are only avail via pick up (ie body kit) Anything and everything FS inside n out. Prices inclued labor , shipping is extra.. Ill post the price of shipping the items Ive gotten quoted. Please allow for up to 3 weeks for delivery on hard to get items.. Most items will ship out with-in a few days. I accept paypal to wonderrecords@msn.com please note your name /address/ and part you are ordering and wheather it is going to a business or home... thank you
* shipping used will be UPS 1st class note if youd like to add ins.*

* located in so-cal (temecula) please call 951-805-5582 for pick up arrangments*



Exterior-





AFTERMARKET"
agressor front bumper = 200.00 (refinished / white primer)
blitz Rear bumper= 100.00 (refinished/white primer)
front and rear together= 250.00
* Pick-up only (srry i will not be responsible for cracking durring shipment)

STOCK"
side skirts= 50$ (pair) *pick-up only
front fenders= 75$ ea *shiping / packaging= 50$ ea
Rear fenders= 100$ ea *shipping / packaging= 60$ ea
Hood w/ airbrushed mitsu logo= 175$ Pick up only
Door handels (white)= 25$ ea *shipping /packageing=10$ ea
Doors= 100$ ea *pick-up only
Low rise 3pc wing= 75$ *shipping=45$
(All glass also FS e-mail for $$$)
Tail lights = 50$ * shipping 40$
Painted center piece w/ mitsu logo= 40$ * shipping=30$
*added* Stock rear bumper painter stock white.. minor paint cracking... besides that mint = 50$ pick up only


WHEELS*

16" alum wrapped in 225/55 fusion HR1's less than 200 miles on tires = all 4 only = 450$ *shipping= 40$ ea
Crossdrilled / slotted front/rear rotors (rear never used front less than 200miles) all 4 = 130$ shipping= 40$

INTERIOR-




Piller Pods+gauges (A/F gauge + Oil pressure (elec))=60$ Shipping=20$
Gauge cluster gauge pods +gauges (volt+ boost/vac)= 65$ shipping=20$
Gauge cluster (blue/red) for ATX n/t= 175$ shipping= 30$
AC gauge cluster(white/blue)= 30$ shipping= 10$
Center air vent panel (complete)NEW= 35$ shipping = 10$
All interior panels are wrapped in black (light/thin) carpet material
E-mail/call for prices/pics
Stock seats (front)= 55$ ea (pick up only)



Enigine/Trans-(bottom end is toast includ. oil pan)


Koyko radiatorw/ fans= 65$ shipping= varies call/email
2 pc CAI= 30$ shipping=15$
strut brace= 25$ shipping= 15$
valve cover (gun metal now)= 45$ shipping=25$

Ractive 9mm plug wire set (NEW) =25$ shipping =5$


*ok this deserves its own line... my hands are shaking as i type this out this is my bab

P/P head complete w/ PT lifters , crower springs/retainers , 1mm oversized Titainium valves (rebowled / smoothed seats)Ported to max allowed Flow bench showed a 60% increase in air flow overstock. (go ahead stick a few fingers in there and play with the valve)Guide stock re-grind cams *broke my crower 2's* AEM adjustable cam gears , new caps with arp cap bolts /head bolts.

Paid 2450$ to have this done (not including cams/gears)Ill let it all go for 1700$ (not too bad for a complete head w/ less than 5k on it ready to blot on) * I may go lower if asked very nicely *
Srry i dont have pics ready atm (havent removed it) email or call for shipping info/pics (shipping varies but average cost is about 75$) (will be shipped pre-oiled/crated/foamed)

Next up is my prototype built ATX... This thing is no joke! U guys on the ATX forums know what I went threw in building this. TrANs has 2300 miles on it and is very strong... Dispite what most may think I nicknamed this my MTX killer. Poly-graphite steels Red type kevlar clutches , 3500 stall TC , Ported oil pump , upgraded solenoid pack (caravan), Stratus final drive gears , Full shift kit installed , polished valve body vains/ports. With these upgraded internals/ custom made steels lighen'd the trans internals by 35lbs. Comes with updated Tourqe Wonder trans chip. This thing is a quick revver and allows for a 4-6% increase in HP to the wheels. So far this is a 1 of a kind.... and im very very proud of it... now im not going to list what i paid for this shit but ill let it go cheep(very compaired to the cost due to 99% of ya being sceptics)

Trans with 3500TC= 750$ shipping = 350+$ depending on where it goes

+ have all the engine sensors/ecu/tcu... all sensors are basically new with less than 5k miles map.. has less than 200miles+

There's much much more like I said everything must go!!!!!!!!!!! But seriously Im sick of fuckin typing... so email/call if ya need anything not listed here. or ask in this post.

Thanx

MrInFiNiT3








With a generous output power rating and the flexibility to handle compact disc formats including MP3, the CD3403 is an ideal unit for high-quality in-car music entertainment.
Maximum 40W into 4 channels
Full CD-R/CD-RW and MP3 compatibility
STARTUNER V
High voltage 8V low impedance outputs
All digital circuitry
STAR DSP (newly designed Digital Signal Processor)
24-bit advanced multi-bit Digital-to-Analog Converter
CD-R/CD-RW compatibility
MP3 playback using optional ECLIPSE Commander Advance
Full dot VF display
Maximum 50W into 4 channels with new MOSFET power amplifier section
Auxiliary input
* ESN has been locked and I will send the security disc with it*
Sale= 150$ shipping=30$








* I was just going to rebuild my baby however... my 2y/o daughter came down with a very bad case of pnemonia in her rt lung to where the sacs at the end of her bronchi are collapsing... my insurance doesnt kick in till late nov. so Ive got some hefty ER bills to pay and well my kids come 1st... However if it was ME ID do the car... fuck my health lol.*








mods include but not limited to:
engine: AEM cai , pp head / TB / intake runners, Chikira 4-2-1 header , custom 2.5" exhast / pacesetter high flow cat/flowmaster2 muff,1mm over sized SS valves,PT valvetrain, AEM cam gears/pully set, prothane motormounts,440 injectors , ground kit.
Trans: Custom ATX (1 of a kind) poly-graphite steels , kevlar clutches , final drive , shift kit,3500 stall TC, Tourqe Wonder trans chip ($120.00 2gnt price only!!email for order info)