>Also, regarding the different sensors you can rig up to >these brains... >the wiring diagram only shows one place to wire in a dual >stage sensor, but what happens if you want to hook up more >then one? I.E. Periemeter sensor as well as a shock sensor? >Do you use the same wires, just spice both sensors into >them, or what? Thanks again! >
From past experience, directly tapping a shock sensor with something like a motion perimeter sensor caused problems. A lot of false triggering. IMO, you should not use the thin red wire to power BOTH sensors. Use the brain's thin red sensor power wire only on one sensor. Just hook up the second sensor's power to another constant power source, like at the brain's main power connection. All new DEI alarms are coming with the green wire of the sensor harness tapped off of the blue wire at the alarm side of the plug. This means that the blue wire of DEI's dual stage sensors carry BOTH the warn away and full alarm triggers, but you need to tap into the green with blue for a addition sensor, just like the shock's wiring was, for it to work properly.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
