Welcome to the 2GNT Forum! Interested In Advertising with 2GNT?
Home | Site Background| Info&Specs| Mods & Tech Info | CAPS | Part Reviews | Donate | 2GNT Stickers |
Search Printer-friendly copy Email this topic to a friend 0 Users in Chat
Top 2GNT Technical Interior/Exterior Audio, Alarms, AV topic #12756
View in linear mode

Subject: "RE: Alarm Install Help Needed!!" Previous topic | Next topic
95grayTsiApr-07-07 02:32 PM
Member since Jan 07th 2007
35 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#12767, "RE: Alarm Install Help Needed!!"
In response to In response to 2


          

12volts white + ignition harness

Starter black/red + ignition harness

Second Starter

Ignition black/white + ignition harness

Second Ignition

Third Ignition

Accessory blue/black + ignition harness

Second Accessory

Keysense

Power Lock brown/white - driver kick, door harness

Power Unlock brown - driver kick, door harness

Notes: To unlock only the driver door on models with keyless entry, use brown/blue (-) at the relays behind the radio.

Lock Motor blue/black 5wi driver kick, door harness

Unlock Motor blue/red 5wi driver kick, door harness

Parking Lights+ green/white + driver kick, harness to rear

Parking Lights- green/white - headlight switch

Notes: Found in a gray 20-pin connector.

Door Trigger red/green - driver kick, harness to rear
Notes: To avoid the dome light delay use red/white(-) at the door open indicator at the instrument cluster. The red/white will also catch the rear hatch.

Dome Supervision use door trigger wire

Trunk/Hatch Pin red/green - driver kick, harness to rear
Notes: To avoid the dome light delay use red/white(-) at the door open indicator at the instrument cluster. The red/white will also catch the rear hatch.

Hood Pin blue/black - fuse box

Factory Alarm Arm green/yellow - driver kick, door harness
Notes: Meter this wire while turning the key in the driver door key cylinder.

Can also use the passenger door key cylinder which is red/blue (-) in the passenger kick, door harness.
Factory Alarm Disarm green/white - driver kick, door harness
Notes: Meter this wire while turning the key in the driver door key cylinder.

Can also use the passenger door key cylinder which is brown/red (-) in the passenger kick, door harness.

Disarm No Unlock see factory alarm disarm

Tachometer white ac instrument cluster or PCM
Notes: The PCM is located on the drivers side of the engine compartment or behind the center of the dash depending on motor.
Wait to start

Brake Wire green/white + brake pedal switch


Horn Trigger green/black - horn switch

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote

Alarm Install Help Needed!! [View all] , DanKid, Mar-31-07 06:12 PM
  RE: Alarm Install Help Needed!!, shonobie, Apr-05-07 04:51 PM, #1
RE: Alarm Install Help Needed!!, DanKid, Apr-07-07 03:47 AM, #2
      RE: Alarm Install Help Needed!!, 95grayTsi, Apr-07-07 02:32 PM #3
           RE: Alarm Install Help Needed!!, DanKid, Apr-08-07 05:26 PM, #4

Top 2GNT Technical Interior/Exterior Audio, Alarms, AV topic #12756 Previous topic | Next topic
Powered by DCForum+ Version 1.2
Copyright 1997-2003 DCScripts.com

I generated this page in 0.021232843399048 seconds, executing 14 queries.