#43280, "RE: Where to run the fuel line?" In response to Reply # 0
On the fuel rail there is a schrader valve. It is on the passenger side of the fuel rail. You have to get a tool to remove the valve from the fuel rail and then you have to screw a fitting in there and that goes to the solenoid. From there the line goes to the fogger nozzle along with the nitrous line.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#43286, "RE: Where to run the fuel line?" In response to Reply # 6
Does plumbing it that way work the best? My setup pulls fuel from a different place. Also, do you guys get any kind of stutter when you hit the nitrous?
#43288, "RE: Where to run the fuel line?" In response to Reply # 8
Mine is tapped in the engine bay also, but right before the fuel rail. There is a section of hose you can cut and tee into between the metal fuel pipe and the fuel rail. It's right below the wiper fluid and brake fluid reservoirs.
