I know the fuel line goes to the fuel solenoid but where do I connect the other end? Please be as specific as possible



1998 Eclipse GS

AEM CAI
NGK Plugs
Magnecore wires
Front Strut Bar
NOS (waiting to install)
Purge Kit
GST/GSX Spoiler
18" rims (waiting till the end of the month)

On the fuel rail there is a schrader valve. It is on the passenger side of the fuel rail. You have to get a tool to remove the valve from the fuel rail and then you have to screw a fitting in there and that goes to the solenoid. From there the line goes to the fogger nozzle along with the nitrous line.



http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Sounds pretty simple. Thanks

1998 Eclipse GS

AEM CAI
NGK Plugs
Magnecore wires
Front Strut Bar
NOS (waiting to install)
Purge Kit
GST/GSX Spoiler
18" rims (waiting till the end of the month)

No problem! :)





http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

the schraeder tool is like a dollar at any autoparts store

Otherwise known as a valve stem puller :)

Michelle

We will NOT forget!
September 11, 2001


96 Eclipse Base Model
Best 14.6@93 w/60 shot
95 Talon Tsi AWD A/T

Do you know what size the fitting is that goes into the fuel rail where the valve comes out?

Does plumbing it that way work the best? My setup pulls fuel from a different place. Also, do you guys get any kind of stutter when you hit the nitrous?

Christian
99 GS Anniversary Edition


http://www.ichibanracing.com/

>Do you know what size the fitting is that goes into the fuel >rail where the valve comes out?

4AN, the line that came with the kit should be 4AN too.


>Does plumbing it that way work
>the best? My setup pulls
>fuel from a different place.

It's just easier with most of the wet kits, right there in the engine bay on 96+.


>Also, do you guys get
>any kind of stutter when
>you hit the nitrous?

Only for a split second.


Michelle

We will NOT forget!
September 11, 2001


96 Eclipse Base Model
Best 14.6@93 w/60 shot
95 Talon Tsi AWD A/T

Mine is tapped in the engine bay also, but right before the fuel rail. There is a section of hose you can cut and tee into between the metal fuel pipe and the fuel rail. It's right below the wiper fluid and brake fluid reservoirs.

Christian
99 GS Anniversary Edition


http://www.ichibanracing.com/