I got the kit from a member and it didnt have the instructions for the shock bushings...
I already did the control arms (front) it was tricky but so far looks good. I did have to eliminate the spacer for the lower control arms and even then the bushings did not fit in the space provided in the body.. So I had to trim the bushings to make them sit flush with the metal sleeve. I read a few post about this bushings and none said anything about trimming this bushings...
The shock bushings I am talking about are this ones..
Just want the diagram so I can install them properly... I will take on the rear part of the suspension on another weekend. That will be interesting..lol I am only worried about the big control arm bushing, seems like it will be the hardest to push in. It's weird that they made that one a solid piece versus the front lower one's that are 2 pieces....
Any heads up on installing this will help a lot..!
Status- Need to do break-in...
Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..
#32836, "RE: Help with Energy suspension bushings..." In response to Reply # 5
Originally posted by Cyexmaster
Originally posted by Star Turbo Talon For the rear front arm you are going to have to use a press. You should not be trimming those bushings. Terry
There was no way I could fit them in unless I had trimmed them...
That's why you use the press. It forces them into place. Welcome to strange rattle land.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#32837, "RE: Help with Energy suspension bushings..." In response to Reply # 6
They where all the way in, there was NO way that would fit where it bolts on to the body not even if I used a press there was no more room for the bushing in the control arm...
Status- Need to do break-in...
Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..