hey so im debating ditching my safc and tuning with my sfmu and wideband but im not to sure exactly how to tune with it.how do i adjust it?its a 12-1 vortech and was thinking i can just switch out the disks if its running rich or lean is that correct or is there a valve or somthing i can adjust?any input would be much appreciated.

Originally posted by spooled420
hey so im debating ditching my safc and tuning with my sfmu and wideband but im not to sure exactly how to tune with it.how do i adjust it?its a 12-1 vortech and was thinking i can just switch out the disks if its running rich or lean is that correct or is there a valve or somthing i can adjust?any input would be much appreciated.

You can make or buy a bleed valve to do a bit of fine "tuning", and changing the disc/ring combos out will be for the larger changes. Here's a good starting point: http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=56157&mode=full

THere are a TON of threads on sfmu's I advice you read as many of them as you can.

cool but one thing I need to know is do I disable my stock pressure regulator since its a 95? and if so can I do it by removing the vacuum line leading to the stock fpr?the way its setup up now is i have my sfmu vacuum line tee'd off to the vac line leading to the stock fpr.so leave it or disable it?

Originally posted by spooled420
cool but one thing I need to know is do I disable my stock pressure regulator since its a 95? and if so can I do it by removing the vacuum line leading to the stock fpr?the way its setup up now is i have my sfmu vacuum line tee'd off to the vac line leading to the stock fpr.so leave it or disable it?

http://www.2gnt.com/index.php?d=How_to_Disable_the_95_fuel_regulator

ok im looking for a 2.72 disk and dark hard spring but they dont seem to sell them indivudually on there site?any alternatives?