ATTN: the list is in no order, other than where i found it in my house...so read through the whole thing to not miss great parts...

Everything is being listed on 2gnt.com and neons.org...

Maybe one of the largest part outs ever on here, we'll see...i bought parts, then bought better parts, etc, and they've overtaken my house...and we're getting married, so its all got to go.

This is just the start.

When you see something you want, PM me or email me, and tell me what it is, and always resend my last message too, i'm going to have 50 people to keep track of...and a lot to do.

I don't have time for low balls now...IF YOU DON'T LIKE THE PRICES, MAKE A SERIOUS OFFER.

I accept paypal from CONFIRMED adresses of people that have been on here for a while, or credit cards through a business merchant account. Or a money order if you want.

PS. I forgot to add, PA residents have to pay 7% sales tax, i have no say in the matter, i have a sales tax license and have to collect it...state says so...

The start of the list:
-----------------------

new black tial 50mm bov, comes with weld on flange, 11psi spring
$200 shipped



used silver tial 38mm wastegate, comes with a weld on flange, bolts, gaskets, etc
$200 shipped







used zeitronix zt-2 wideband, comes with brand new boost sensor, 50psi, tons of wires, egt harness, wideband o2 sensor, cables, cd, etc...$279 + $119 + $19 + ship new from zeitronix...
$400 shipped



new bosch 044 fuel pump, plus i have all the correct AN adapters for it i'll toss in for free, not a knock off pump, i paid a fortune for the real deal. plus i found some insulated "U" shaped brackets that fit it i'll also toss in.
$200 shipped



used inline fuel pump that came with a hahn kit, probably a walbro or accel...comes with bracket and some hose...
$75 shipped

stock fuel pump bracket that fits into tank, great condition
$20 shipped



new walbro high pressure 255lph fuel pump and filter, etc.
$90 shipped

PIC COMING LATER

new professional products 75mm throttle body for a 96-93 mustang, satin finish...was gonna fab up to my car...
$120 shipped





new odyssey pc680 battery
$100 shipped

PIC COMING LATER

used autometer pro comp ultra lite electric oil temp gauge #4356
$150 shipped



used autometer sport comp AFR gauge
$55 shipped



used autometer pro comp ultralite electric fuel pressure gauge, 100psi #4363
$185 shipped



"make your own stainless 3 inch downpipe kit" - i have mandrel bends, flex pipe, flanges, 02 bungs, all in stainless, all ready to be fabbed into your own downpipe like the shape of a hahn one - and i'll throw in the gaskets you'll need later too
MAKE A SERIOUS OFFER - TELL ME WHAT YOU NEED





used greddy oil catch can, chrome
$80 shipped

PICS COMING LATER

used thermal RD 3" cat-back exhaust, i think it comes with a cat delete pipe too if i'm not mistaken
$450 pick up near pittsburgh pa

PICS COMING LATER

DOHC exhaust flange - stainless i believe? maybe mild...have to check
$50 shipped



used ported TB, 55mm i do believe
$100 shipped

PICS COMING LATER

new 3" in/out same side, front mount intercooler, godspeed, top bottom flow, $210 shipped ebay
$190 shipped

PICS COMING LATER

new 4an stainless braided hose, has fittings, 20' i believe
$40 shipped

PICS COMING LATER

new gutted 3" universal cat
$25 shipped



new 2.4L PT cruiser PS mount, 04891517aa
$10 shipped



new PS pump pulley, plastic, 4 grooves like a neon, 04668448aa
$15 shipped



new 2.4L PT cruiser front timing cover, 04884409aa
$15 shipped



several sets used stock injectors
$30 shipped each

PICS COMING LATER

new aluminum upper rad hose replacement - actually fully aluminum, not braided rubber, summit sum-390124, 24" long with ends
$70 shipped





new sealed power bronze valve guides
$30 shipped

PICS COMING LATER

new stainless precision engine products +1mm o/s valves, all 16
$120 shipped

PICS COMING LATER

new turbo xs type h blow off valve - not "rfl" type
$130 shipped



used 4an hahn turbo oil feed setup
$50 shipped



used autometer pro comp ultralite electric EGT gauge and probe 1600F #4344
$120 shipped



new coolingmist water injector setup - pump, hoses, wires, etc
$180 shipped



like new autometer carbon fiber ultralite 30psi electric boost gauge, only gauge was hooked up, rest is unused including electronic boost sensor #4777
$165 shipped

PICS COMING LATER

used greddy profec b spec II, wires, harness, etc...instructions...black in color...
$220 shipped



new greddy full auto turbo timer
$80 shipped



new rhoads lifters - brand new pt cruiser lifters, sent to rhoads, redone there and sent back, only filled with oil and set in a head that was never run
$200 shipped

PICS COMING LATER

new pt cruiser rockers - set in the same head that was never run
$130 shipped

PICS COMING LATER

new crower stage 3 cams - set in the same head that was never run
$380 shipped

PICS COMING LATER

like new 2.4L arp head studs - clamped down one head to a block, never ran - come with upgraded oversized arp washers (along with unused original size) plus oversized arp nuts with more clamping area
$100 shipped

PICS COMING LATER

used aeromotive FPR and fittings for it, some brand new
$130 shipped - TELL ME WHAT FITTINGS YOU NEED, I'LL TOSS SOME IN



new hahn fuel rail
$85 shipped



new precision turbo gt3582rlps (ptb150-3570), $1600 retail, known as a "gt35r" turbo, ball bearing, t3 4 bolt, .63ar hotside, cnc ported surge holes, .70 ar cold side, cnc ported cold side exit, water cooled, the whole works...
$1400 shipped

PICS COMING LATER

new oil drain adapter for gt35r and other turbos to -10an male
$15 shipped - BOTTOM OF PIC



new oil restictor for ball bearing turbos to prevent seal blow out
$10 shipped - LEFT IN PIC



new water cooling adapters for GT35R and other turbos to -6an i believe
$15 shipped - UPPER RIGHT IN PIC



new "fuel line setup" - i have 6ft 6an braided, 10ft 8an braided, and many, many, fittings that i had ready to make a who new fuel setup for my car, front the pump output to a FPR through 2 fuel rails, its all there
MAKE A SERIOUS OFFER - TELL ME WHAT YOU NEED - 8AN SETUP READY TO GO



new 5269558 sensor - genuine mopar oil pressure sending unit
$70 shipped

PICS COMING LATER

new 33004281 sensor - genuine mopar coolant temp sensor for 95
$30 shipped

PICS COMING LATER

used weld racing wheels, a pair for front, 15" x 8", 4.5" backspace, i believe called "rodlites", they have dual 5 bolt patters, so they fit other cars too...
$400 shipped

PICS COMING LATER

race ported cylinder head - stainless ferrera +1mm o/s valves, brand new crower valves springs and titanium retainers just put on, just resurfaced, then clamped down to an engine, and sitting since
$700 shipped

PICS COMING LATER

used fluidyne radiator
$300 shipped

PICS COMING LATER

2 used low profile pusher fans for fluidyne
$120 shipped

PICS COMING LATER

new magnaflow mp 7010 inline fuel filter - 25 mictors, 8an inlet/outlet
$80 shipped

PICS COMING LATER

new 2.4L oil pump
$130 shipped

PICS COMING LATER

stainless tubular turbo manifold - i bought all the parts, cut them all on the horizontal bandsaw, got everything ready to get welded...and never got it welded...comes with everything seen in this post, you weld it yourself or get someone to do it...will fit an "s cover turbo" on a 2.4L swap...
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=100980&mode=full
$250 shipped

new 2.4L crank scraper plus new oil pan gasket
$70 shipped

PICS COMING LATER

new arp exhaust manifold studs
$60 shipped

PICS COMING LATER

cometic HP overbore headgasket - i clamped it between a block and a head, but the engine was never turned over
$50 shipped

PICS COMING LATER

new mopar 05269983 genuiune mopar map sensor
$80 shipped

PICS COMIGN LATER

new mopar 33004280 genuine mopar air intake temp sensor
$25 shipped

PICS COMING LATER

used 4671276 mopar map sensor
$30 shipped

3" stainless v band clamp and flange to weld on
$25 shipped



3" v band turbo outlet, fits on GT35R and many other 4 bolt out turbos, i have bolts for this somewhere around here too
$50 shipped





strut tower bar front
$25 shipped



...and there will be plenty more to come...its unreal...i haven't even gotten to transmissions, blocks/engines, and an entire car that needs parted out...

...also have adjustable cam gears, some other stuff that i haven't found or listed yet...

answer pm's bro

I said above that its hard, if i miss a PM, i'm sorry...i've tried to answer them all...and its hard when some people say they'll pay for something, then never do...trying to keep track of the best i can...

PM'd

Pmed

Pm sent

I think i answered all the pms...

im interested in the zietronix however the same kit goes for 390 shipped on ebay and from time to time goes for closer to 340 shipped on dsm tuners through their vendors forum.

any chance your willing to budge on that asking price?

Nope not mine...

Think i got it now...

Parts sold: intercooler, cams, 2.6L block...

Still tons available, and more to list later...

Shipping on egt to 29369?

Everything is price shipped.

Cams, valves, and boost controller sold.

Come pick up on east side of pittsburgh with cash for discount...

Everything is best offer, don't be afraid, need this stuff to go, let's bargain...

stuart

Originally posted by pghsebring
Cams, valves, and boost controller sold.

What about the fuel rail? :P

Yeah, that too, forgot about that off the top of my head...

Cmon guys, these parts needs gone this week...PM me with some prices, lots of good parts here...