Finally got money to order the kit..:_) A buddy club II kit is on its way home Also my new rims arives this week or next week and same with my new win Finally getting somehwer )

1997 GST Spyder
My car on

GET PIX OF EVERYTHING! EVEN THE BOX THE KIT COMES IN LOL GOOD JOB

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*

Oh I will..make a full write up on the job from delivery of package till final product on the shows..trust me.Only reason I bought a digital camera really*LOL*

1997 GST Spyder
My car on

cool, congrats and good choice on the kit. what are you going to do about the graphics? or are they painted? just wondering if they were staying or going.

graphics are vinyl and they go...New paintjob with a new paint that just came out her New wing, new rims, a light bar is added too. Interior is being ripped and a new stereosetup is being built+ race seats are going in(they are in my garage now) SO it should be fu Alot of work left but those who saw my GS know that it will be done *smile*

1997 GST Spyder
My car on

Good choice on kit.

Mike
www.streamlinemotorsportsva.com
http://members.cardomain.com/eklipsdrvr99

What rims did you get?

User banned for scamming members on 2GNT, WIDSM, and CHITOWNDSM. This user and his brother Jason Ames have been involved with theft of parts from other DSM members. This individual is not trustworthy and should not be involved in any type of sale.

KOSEI GZZA 8,5x18"

1997 GST Spyder
My car on

Thought I would throw up soe pics of how the kit turns out on the car.Stiol not painted but its going to the painter after this weekend Had to make some custom stuff though..My FMIC is huge and doesnt fit well with a kit thats made for stock IC....Same with exhaust..I have dual 4" pipes...kit was made for one...Well here it goes...It is straight eventhough it looks a little off..one pipe is sticking out and fools the eye a little...



Sideskirts glued/screwed and started to mold them in...



front:


and one overall pic...

1997 GST Spyder
My car on

very damn nice imo. makes me want a bc2 kit again.

www.gregsorrells.com

http://ubanimator.com>

That is nice! The buddy club 2 kit is the only kit that I would think of getting.

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)

User banned for scamming members on 2GNT, WIDSM, and CHITOWNDSM. This user and his brother Jason Ames have been involved with theft of parts from other DSM members. This individual is not trustworthy and should not be involved in any type of sale.

Looks hella nice. What paint color are you getting? And when you think your going to get done with it and have final pics of it? I am impatient person.... Can't wait to see it.

97' GST(4G63)
Evo 16G Eclipse

i ordered the skirts the other day, and i'll be ordering the front and rear as early as tonight. i cant wait, this kit is muy hot IMO

--------------------
99 GS-Turbo 3.55 MTX
S16G @ ~15psi - FMIC - Forged Internals
Clinton Township, MI

Status: Parting Out...

damn now everyone is getting the bc2 kit, soon it is gonna be like he blitz kit. oh well, i still am prolly gonna get one. by the way, how thick is the fiberglass in the bc2 kit?

I no longer have my 99 rs because i totaled it!!!

That looks sick even not painted. I like the wing to...very nice man.

Steve-o
Top secret.

Originally posted by FlyinEsi
I guess I'll just have to live with a 500+ hp AWD 4-banger.

can you take some more pics of the rear bumper?

i really like bumpers that come down low in the back.

james

oh and where did you get the kit from?

james

Im also gettin that front...lol -- my front isnt low enough...and that front just rocks.

Car looks great man..cant wait to see final product

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

nice, man
the exhaust looks sick, imo. are you doing all the body work yourself?

RIP- Rustbucket 1995-2009

‹hazardeclipse› by the way youre thinking of hazard_eclipse
‹hazardeclipse› thats not my fucking car
‹teklein› Oh yeah
‹hazardeclipse› he stole my name
‹hazardeclipse› fuck that radioactive yellow shit
‹teklein› Hazard_eclipse is the homo.

Originally posted by hazardeclipse
nice, man the exhaust looks sick, imo. are you doing all the body work yourself?

1997 GST Spyder
My car on

kept the stock front lenses...



Cut up a grill so I can get more cooling to the engine...



and on the car..but no ready yet of course:

1997 GST Spyder
My car on

looks good...but the one side in the front looks in too far....the headlight doesnt line up-its stickin out

its not in place..*LOL* It just hang there with two screws on top under hood...The front is not attched as it should be..just put it there to take the pic ya know When its in placeand bolted up..it lines up prefectly

1997 GST Spyder
My car on

ok in that case it fugin awesome

Finally a good pic of the rear....Hole around exhaust is fixed now so its traight...bu the ic was taken before I did it ..so dont look to close on it

1997 GST Spyder
My car on

damn... that car USED to look good.

Xtra large wing you got thurr....
Hope the stock pistons can hold it up....


Undergoing MAJOR modifications, inside and out: Sneek peek at whats going on
End of Project Goal - 5/12/04
member# 2498 / female member# unknown

nice, but I think it would look nicer if the nose area in this pic were molded shut.

-=It's all about style=

i think it looks damn pimp...good job on the customizing of it too. At least you picked one of the few wings that somewhat flows with our cars...Paint her up

Are you sticking with teh same graphics?? Getting different ones?? Getting it painted a new color???

PHAT.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

wing is the kaminari KTR wing..looks alot bigger in the pic due to angle I think.

Not keeping graphics or color.New paintjob over the entire car and this year it will be clean..no graphics or such.

Moldecx shut in nose area? Mean between the lights?It came molded from the factory and I thought it was missing something so I opened that hole up myself. it gives me alot more air to the radiator/turbo/manifold so it cant hurt.The FMIC is blocking alot of the air to the radiator so I need it:-)Its molded inside so its just not a hole..its alittle "tunnel" in there too..

1997 GST Spyder
My car on

Damn man, That is hot as hell. If the wing is as not big as you say it is I think it might become the hottest clipse i ever seen. Guess just gotta wait till its done. Also thought that tunnel was a huge mistake but when it's all cleaned up it just adds to the hottness. Well done. What color is it gonna be?

Damn that hot

She's a good car. But it's time for me to move on. I'll miss her more than anything but my next car will have the same heart with the same passionate drivers. I hope things workout best for the both of us.

nice job

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors

Originally posted by TanDaMan99
Damn man, That is hot as hell. If the wing is as not big as you say it is I think it might become the hottest clipse i ever seen. Guess just gotta wait till its done. Also thought that tunnel was a huge mistake but when it's all cleaned up it just adds to the hottness. Well done. What color is it gonna be? Damn that hot

1997 GST Spyder
My car on

looks good man.... the only things different btw mine and yours is the exhaust and front. great minds huh. i pick mine up today from the body shop. had to send it back so they could pearl the door jambs and a couple other spots. pics forth coming... and keep up the good work.

Keep em Lookin Good And Driving Fast!

send me some pics of it then I wanna see it! Always nice to see newly finished cars and how they loo

PS: Was your car like my Spyder or like the red GS btw?

1997 GST Spyder
My car on

Well you are prolly sick of my updates but here is the front painted and meshgrill + CF lip installed as well..pickin up car ion sunda

1997 GST Spyder
My car on

looks awesome, be sure to post completed pics... i know i will be looking for updates 8)

Evo 8 - 12.3@113 circa 2009 (~330whp)
Now with BB Xona Rotor HTZ FP Red and ~450whp
2018 MSM Civic SI Ktuner TSP stage 1 w/ Honda hacked headunit.

Well here are some few pics of when I picked it up at the painter....Hope ya like it.Doesnt show all colors that the paint flopps in but still gives an aidea on what I di Hope you like it

1997 GST Spyder
My car on

thats a fuggin hot ass color dood x a bajeeeelion

is it a chamelion job or a crazy pearl and alot of sparkle?? Details man, details. I fuggin love the color.

hehehe..mostly all of it*LOL*

Its a color from Standox called Kyamashi Chrystal...

1997 GST Spyder
My car on

Whoa.....Paint is insane, in a good way...rock on

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

VERY nice IMO. You got quite a chore on the interior. Fucker is tore up good. Good luck, sir.

__________________________________________
~Chris
03 SRT-4

I know this thread is geared towards the body kit and paint, but have you put on your 18x8.5 rims yet?? How do they fit? What is the offset, and do they rub at all?



Reverse El-Glo HVAC Panels Update: Tooling Started
Expected Release Date: June 1st

Originally posted by DR1665 bubble = teh bust3d.

Looks damn GOOD!!!

Shawn
99 Eclipse RS
Hahn Stage 2,Full built bottom end with je 8:8 and eagle rods ect..

FUCKIN SHIT DUDE I JUST CREAMED MY PANTS

I think GSBBTURBO might have competition now

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild.
*Beginning Project: Boost

gsx wheels look out of place, i think you should get some twankies

______________________________________

11.65 @ 115

Well the GSX whels were on only for the work and the paintjob..dont wanna mess up my new rims.Earlier in the thread you can se my new ones..alot btter then GSX ris I think

I tried the new ones on..and htey go flush with outer edges of the fender..real nice

1997 GST Spyder
My car on

two more pics..stuff isntalled..

1997 GST Spyder
My car on

looks real nice, cant wait to see it when its cleaned and the new rims put on

where did you buy the paint..where did you buy the kit..how much was the paint job itself, etc etc. I would love details..your car is nice

Aem Cold Air AFX 55mm TB
Fidanza Cam Gears NGK Wires
AFX UDP Greddy Header
Gutted Cat Greddy Evo Catback
Energy Suspension MMI Eibach Sportlines
Tokico Blues...always more to come

www.henshinauto.com = teh buddy club 2 kit

Kick ass color......cant wait to see it with the rims on.

http://www.cardomain.com/id/hunntyr


(\__/)
(='.'=)
(")_(")

When you say the rims are flush, do you mean if you hit a bump they are going to hit the fenders, or they are just inside the fenders??

I'm looking at some 18x8.5 rims, please give me all the details you can on the rims...offset, tire size you are using, how far you are lowered...do you think you will rub when you turn the wheels??

Thanks man, I appreciate your help.

The rims I'm looking at are a 18x8.5 w/ 235/40/18 rubber, +35 offset, I plan on bieng lowered 2", will those rub? Thanks



Reverse El-Glo HVAC Panels Update: Tooling Started
Expected Release Date: June 1st

Originally posted by DR1665 bubble = teh bust3d.

Well they go flush with outside of the fenders wich means if they would go all the way down in a bump they would hit..but they wouldnt do that.I have a very very hard suspension setup*S* If you go with you sizes and on 2" drop..I would say that they will rub..Prolly will need to roll fenders some....But ot sure. Also depends on offset etc..

Mine are 38mm ET and are 8,5x18 in size with 225/40 tires.Kept smaller tires just so I wouldnt hit the fender. I can turn full and put the car daown max and it wont hit front fender..In rear ...they wont rub eiether*lol*

1997 GST Spyder
My car on

The back bumper is too tall ... comes too far down to the ground. I would take about 4" out of it personally but it's not my call now is it? The front and sides are tight and the colour is amazing. I love the spoiler but most of all I want to see this car when it is finished.

So finally all together...rear bumper not attached properly but here ya go, changing rims on tuesday:

1997 GST Spyder
My car on

Where did you get those eyelids??? First decent ones I've seen. Only ones I've seen actually.

-WILL

AIM - scirio
Got Boost? ...No.

I made them my self..fiberglassed them one night at the garage Thanx!

1997 GST Spyder
My car on

Originally posted by GSwede96
I made them my self..fiberglassed them one night at the garage Thanx!

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

that looks fucking bad ass. your car is pimp dood

--------------------
99 GS-Turbo 3.55 MTX
S16G @ ~15psi - FMIC - Forged Internals
Clinton Township, MI

Status: Parting Out...

All I can say is WOW. I am not normally into the show scene but good lordy, that a lot of great look work put in that actually looks good. I thought the rear might be too long, but it completely matches the front; it evens it out. Dude, the eye lids are awesome as well; you should probably patent it or something cause someone is gonna steal that idea.



-------jezreel
1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting

That car looks SICK! Great job!

__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

Whoa! I forgot all about this thread. Your car looks amazing sir!

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)

Finally..completed outside..new rims o

1997 GST Spyder
My car on

**spooge**

Where you center tail?

-WILL

AIM - scirio
Got Boost? ...No.

making a carbon fiber one....
I have stock lights on now..WITh centerpiece as long as the CF is on its way...

1997 GST Spyder
My car on

Wow, props for originality. That roll bar is awesome.

_______________________________________________________

WOW that's nice! I love the rollbar, CF lip, and eyelids, great work man it all flows together so nicely



95ESI-cai,borla,sportlines,kyb,tsw
more on the way

Best kit evar

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

Wing is too big imo...the low spoiler would of better suited it imo

BUT

I still like it man, very AWESOME!

User banned for scamming members on 2GNT, WIDSM, and CHITOWNDSM. This user and his brother Jason Ames have been involved with theft of parts from other DSM members. This individual is not trustworthy and should not be involved in any type of sale.

It looks great. I want to say lower it somemore but i wouldn't want to see the kit damaged. Downloaded all of your pics too hehe.

95 GST | So-Cal

Oh I would like to lower it more but we have those fuggin speed bumps on the way to my garage..(rental place) and I cannot get over them if I lower any more. I have coilovers though so I lower it sometimes on shows and stuff like that Thinking of putting 19s on though to fill up a little more but it will have to wait..cant afford right no

The wing part..I tried with my stock as well...looked like shit actually..IMO....so I puton the big wing..made the whole flow of the car much better.But thats just me..and its my car so it stayts*LOL*

1997 GST Spyder
My car on

looks damn nice imo. we really need to start a new thread for this though because this one takes too damn long to load and im on t1.

www.gregsorrells.com

http://ubanimator.com>

Well its a sad day for me but I am selling my car.Got an opportynity to build a house at a very good place and I need to free some money for it to be able to get my loa Puting the spyder up on its last show in my name in end of March 2005 and then its a goner
Hope you all enjoyed following my work with my cars and I must say I gotten alot of help and contacts via all the different DSM forums around! Keep it up and be well everybody! I will come back with pics from the last show and after that I am gone from the DSM scene for awhile.

Peace out and thanx again for everything/Roger

1997 GST Spyder
My car on

Originally posted by GSwede96
Well its a sad day for me but I am selling my car.Got an opportynity to build a house at a very good place and I need to free some money for it to be able to get my loa Puting the spyder up on its last show in my name in end of March 2005 and then its a goner Hope you all enjoyed following my work with my cars and I must say I gotten alot of help and contacts via all the different DSM forums around! Keep it up and be well everybody! I will come back with pics from the last show and after that I am gone from the DSM scene for awhile. Peace out and thanx again for everything/Roger

R.I.P. 1997-2006 thanks to a Honda in the wrong lane.

That's sad. too bad you cannot sleep in your car comfortably ;p I liked the spyder with the exception of the grill between your headlights. anyways, nice work

Hey Roger....long time no see. As you can see, I'm joining this thread late. The car looks awesome man. I love the work you did and the color. It's a shame you have to sell it, but a house is great too man. I just built a house last year and it was great. I still have my car too though....can't seem to sell her and go back to having car payments. Take care and let us know how everything goes. Later...

http://www.cardomain.com/ride/3130861