Welcome to the 2GNT Forum! Interested In Advertising with 2GNT?
Home | Site Background| Info&Specs| Mods & Tech Info | CAPS | Part Reviews | Donate | 2GNT Stickers |
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Performance/Engine topic #130749
View in linear mode

Subject: "stock sensor pinouts/wiring" Previous topic | Next topic
streetlightningMay-29-10 01:12 AM
Member since Mar 19th 2004
778 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#130749, "stock sensor pinouts/wiring"


          

im looking for info on the crank sensor, TPS, VSS and IAC.

i have the plugS but wires were removed (from the crank sensor) the rest have their wires.\, and i cant seem to find a pic or a good refenece on which pin/color is Vref, ground and signal. this goes for the TPS, iac AND vSS. Thanx in advance.

i think its a newer style Cranl POS, but the pinout should be the same?

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

ModeratortekleinMay-29-10 07:39 AM
Member since Nov 04th 2007
1699 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list facebook
#130750, "RE: stock sensor pinouts/wiring"
In response to Reply # 0

          

Here ya go, you can download the FSM from Dino.

http://nawdu.de/files

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
streetlightningMay-30-10 02:59 AM
Member since Mar 19th 2004
778 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#130762, "RE: stock sensor pinouts/wiring"
In response to Reply # 1

          

dam, i went thru that thing all day and while theres alot of info.. im not getting the info i need : ( or perhaps im not reading it right..? anyone?

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
streetlightningMay-30-10 01:44 PM
Member since Mar 19th 2004
778 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#130763, "RE: stock sensor pinouts/wiring"
In response to Reply # 2

          

can some one verify this?

Crank
Pin 1: Yello 8v Refernce
Pin 2: Black /Green- ground
Pin 3: Blue whgiite: signal

VSS:
Yellow: 8v Refernce
Black /green - ground
Yellow/white tach signal

TPS
BROWN / RED- Signal
Green yellow- 5v power

cOIL:
BROWN: coil 2-4
BLack/blue Coils 1/3
Black red - 12V or ASD relay.

IAC
this one idk, shouldnt there be a power and ground? or is this just resistance based?

Green / Blue Iac pin 2
Orange/blue Iac pin 3

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #130749 Previous topic | Next topic
   

Powered by DCForum+ Version 1.2
Copyright 1997-2003 DCScripts.com

I generated this page in 0.070773124694824 seconds, executing 12 queries.