130763, RE: stock sensor pinouts/wiring Posted by streetlightning, Dec-31-69 06:00 PM
can some one verify this?
Crank Pin 1: Yello 8v Refernce Pin 2: Black /Green- ground Pin 3: Blue whgiite: signal
VSS: Yellow: 8v Refernce Black /green - ground Yellow/white tach signal
TPS BROWN / RED- Signal Green yellow- 5v power
cOIL: BROWN: coil 2-4 BLack/blue Coils 1/3 Black red - 12V or ASD relay.
IAC this one idk, shouldnt there be a power and ground? or is this just resistance based?
Green / Blue Iac pin 2 Orange/blue Iac pin 3
|