Hey,

Putting a motor into a automatic car. I know NOTHING about autos.

With crank pulley and flex plate on, out of the car, motor turns by hand fine.

With motor assembly bolted and torqued to the trans with the 4 motor to trans bolts, you cannot turn the motor by hand. Like not at all.

If you loosen those four bolts about a quarter inch, you can turn motor by hand. Was able to install the four flex plate bolts this way.

Torque converter turns freely without motor, and turns freely bolted to motor as long as those four mounting bolts are loose.

Flex plate is installed with the welds towards the trans.

Thanks,

Tim Klein

i dont really know too much about auto trans either but is it in park or nuetral?

Yes, it was in neutral

The problem was that the torque converter was not on all the way.

For search purposes, when you put the torque converter on, gently push in and turn. there will be three clicks and the converter will move closer into the bellhousing.

Then it is all the way seated.

More like 3 'slides'. It will take a good few many tries, but it recesses quite far into the bellhousing.

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim