wyatt-- one thing to note under your FAQ's page. You say that you can use the wastegate adjustment screw to adjust boost pressure. You say that turning the screw puts more tension on the spring which is not true at all. if you have ever taken your wastegate apart, you will see that it doesn't. This screw is for adjusting boost drop off and boost creep. If you see creep, back it out, if you have drop off, turn it in. All it does is control how far the wastegate can open. Hence, why you blew your motor. You had it turned in so far that it wasn't opening hardly at all, hence mad boost creep. Just to let you know, so that no one reads it and starts playing with it and closes their wastegate off.