#4426, "RE: Want To Do The Manual Swap.. Don't Flame Please Read First" In response to In response to 10 Jun-02-05 11:41 AM by willmayo
Originally posted by EclipseTenzoR So the clutch should bolt rite up to my starter plate from the atx? What about the flywheel, where do I get this.. The automatic doesnt have a flywheel in it rite? So I need to get this from a manual. Also this bracket, is this a custom job or just something that is typically found already bolted on the mtx. Sorry for all the questions but I am basically going into this blind folded. If I can get a good understanding of all this, when I start the project I will try and add to write up we have. Pictures would deffintly help out alot
clutch, flywheel, and pressure plate are all riveted together in one unit (a modular clutch). The bracket you need is the stock trans to mount bracket found on a 5-spd 2gnt.
Originally posted by 96NTeclipse The mount under the battery is different from auto to manual too
The mount itself i'm sure is 100% the same atx to mtx, or at least it works. I know i'm still using it. The bracket that bolts to the tranny for this mount however, i'm not sure about. you may or may not need that bracket. Try to get that bracket with the trans when you get it.
-------------------- 99 GS-Turbo 3.55 MTX S16G @ ~15psi - FMIC - Forged Internals Clinton Township, MI
