Originally posted by intimidator2003 I just finished my shift kit install and I took the car for test drive and getting the error codes po700 and p0734 what could be the problem.
Found this off a pt cruiser site:
P0700 -Transmission Control System
This is an informational DTC letting you know that a DTC(s) is stored in the Transmission Control Module, which can identified with a DRB III scan tool.
P0732 - Gear Ratio Error In 2nd
Possible Causes:
Related DTC's Present Transmission Solenoid/Pressure Switch Assembly Internal Transmission Intermittent Gear Ratio Errors
P0734 - Gear Ratio Error In 4th
Possible Causes:
Related DTC's Present Transmission Solenoid/Pressure Switch Assembly Internal Transmission Intermittent Gear Ratio Errors
Recheck your final drive gears and valve body and make sure everything is in place.
95 Eclipse GS || Custom 9.6:1 JE Pistons || Eagle H-Beam Rods || MLS Headgasket || SBI Lifters || SBI adjusters || Fidanza Cam Gears || AFX Underdrive Pulley || Melling Oil Pump || 97 Front end Conversion || GTR Wing || MSD Ignition || Accel wires|| AEM Cold Air Intake || P&P intake manifold ||P&P Intake Ports || Jeep TB Mod || EGR Block off plates || NGK Plugs || Front/Rear/Lower Strut bars || VIS coilovers || Clear corners ||custom headliner || in dash LCD screen || PS2 || Eclipse CD player|| 18" Racing Hart C4 || B&M Transcooler || Final Drive Gears || Shift Kit || Energy Suspension Motor Mounts || Torque Converter Kill Switch || Solid front mount ||