If you are looking straight down on the fuel rail, there is a rubber hose that bolts too the right side of the rail. That hose is approx. 6in. long. It has a female end and that attaches too a hardline that is attached to the firewall. The male fitting on the hard line is what I am looking for.

There is a second fitting of the same type under the car. If you pull the back seat and the access plate that allows you to see the top of the gas tank, you will see where the gas pump is mounted into the tank. Coming off the top of the pump bracket are two lines, one with a regular rubber hose clamped on (this is your return) and one that has a male fitting (the one I'm looking for) that threads into another hose like the hose up front.

I need both male fittings, I hope that this made more sense (I also hope that '95s have these same fittings, otherwise Im going to look like a major jackass)

If you can hacksaw these fittings off for me to use in fabricating my own fuel system, I'd appriciate it greatly.

Representing the Central Cali chapter of 2GNT!
(I think I'm the only member )