Let me know what you need. Gray interior, green exterior. Some stuff have been parted. But chances are I will have what you need.

tranny?
Location?
Fuel pump bracket?



Nick
97RS

If you have a complete interior I need the triangle plastic covers for the manual side mirrors. If you have them andd are in good shape.

I need a 95 ECu from an Auto?

did u get my email/pm/msg (i dont remember) about the AFX UDP?

looking for the fuel pump plate with the 2 hardlines coming out of and the bracket on bottom to hold the fuel pump. mines is kinda bent cause i tried to unscrew a brazed screw and i will be changing my rubber lines to 6an ss so i need one that unscrews not the brazed type.
THX.

oh yeah PM me with a price if u have it.

pm sent

Originally posted by edxmon
did u get my email/pm/msg (i dont remember) about the AFX UDP?

I sent you a PM, but you never responded. Now the pulley is on ebay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8050169071&rd=1&sspagename=STRK%3AMESE%3AIT

Still got the strut bars though. Asking around $35 and shipping.

Everybody else got PM's

Originally posted by edxmon
did u get my email/pm/msg (i dont remember) about the AFX UDP?

FYI
He's got a bunch of stuff listed on ebay including the UDP.

http://motors.search.ebay.com/_W0QQsassZflamingcat

Bump, anybody else?

yea Ebay is where i found them and recognized the name bro, just wanted to know if he would pull em off auction/ buy it now for me. how much shipping for the struts to 91950.

I'll ship the struts for $45. Both front and rear, let me know.

EBAYING EVERYTHING!!!!!!
http://motors.search.ebay.com/_W0QQsassZflamingcat

Check that link daily, I will probably add more stuff everyday or every other day. Probably going to sell windshield, windows, door's, hatch, yea i mean EVERYTHING.

do you have ant turbo parts, specificly pipeing,bov,missing link,and oil lines?

turbo kit is gone

And my built block is going on ebay in about a week. Please take it off my hands.

Do you still have the 2 huge crossmember front bolts? If so, let me know of the price + shipping to 73145. Thx.

Originally posted by MiztahfooLish
Do you still have the 2 huge crossmember front bolts? If so, let me know of the price + shipping to 73145. Thx.

You got a PM

My built block is going on ebay in about a week. Please take it off my hands.
http://motors.search.ebay.com/_W0QQsassZflamingcat

i am needing hvac blower motor.

I need the coolant temperature switch wiring harness. I need the harness and some wire from the single-wire one. The one for the dash gauge. The wire pulled out of the harness on mine.

Let me know how much shipped to 17033.

-Nate
________________
-97 Avenger I4 5spd (R.I.P.)
-95 Eclipse GS 5spd
-Mods: Megan Header ,Megan Racing Cat-Back, AEM V2
All-Motor Buildup on the way

Originally posted by brabkay
i am needing hvac blower motor.

How about $45 plus 20 shipping to $65 shipped?

Originally posted by 98VengeI4
I need the coolant temperature switch wiring harness. I need the harness and some wire from the single-wire one. The one for the dash gauge. The wire pulled out of the harness on mine. Let me know how much shipped to 17033. -Nate ________________ -97 Avenger I4 5spd (R.I.P.) -95 Eclipse GS 5spd -Mods: Megan Header ,Megan Racing Cat-Back, AEM V2 All-Motor Buildup on the way

How about $15 shipped? I dont want to bother with anything less than $10, because of paypal fees, packaging, gas, shipping, etc..

My built block is going on ebay in about a week. Please take it off my hands.
http://motors.search.ebay.com/_W0QQsassZflamingcat

I can paypal you tomorrow. That is fine. Thanks.

-Nate
________________
-97 Avenger I4 5spd (R.I.P.)
-95 Eclipse GS 5spd
-Mods: Megan Header ,Megan Racing Cat-Back, AEM V2
All-Motor Buildup on the way

pm sent

Originally posted by rico_arg
pm sent

Did not get it, could you send it again.

i just email you.....about a manual tranny

Got the rear upper control arms? both sides? shipped to 63857

Originally posted by ColtsNumba1Fan
Got the rear upper control arms? both sides? shipped to 63857

You got PM

"My built block is going on ebay in about a week. Please take it off my hands."

Give me some info on the motor please.
Where are you located??
Thanks

Do you still have the rear hatch seal???

DO YOU STILL HAVE THE DOOR PANELS?

WHAT ABOUT YOUR EXHAUST PARTS? WHAT DO YOU HAVE LEFT? DO YOU HAVE YOUR INTAKE STILL? OTHER INTERIOR PARTS DO YOU HAVE LEFT?

Originally posted by bigmike95eclipse
Do you still have the rear hatch seal???

Hatch seal is torn a lil bit, dont think you want it.

Originally posted by NYKYLYN
DO YOU STILL HAVE THE DOOR PANELS?

I got gray door panels that are in pretty beat up shape, let me know if you want them.

Originally posted by NYKYLYN
WHAT ABOUT YOUR EXHAUST PARTS? WHAT DO YOU HAVE LEFT? DO YOU HAVE YOUR INTAKE STILL? OTHER INTERIOR PARTS DO YOU HAVE LEFT?

I have stock exhaust, and a short ram intake left. And All the interior except the center console still for sale.

Do you have a driver's side motormount looks like this

Yes, i do, let me go make sure if thats the right one, and i'll send you a pm tomorrow.

do you have the mesh covering that cover the 6X9 speakers in the back. if so how much to ship to canada

Did u sell the rear control arms upper and lower? i'll take if not.........

do you happen to have the 1st o2 sensor? the 1 by the headers? if so how many miles on it? and do u know if it was working?

The mesh will be sold with the rear passenger panels.

The rear control arms are sold.

The O2 sensor was sold with my turbo kit.

you happen to still have the front right hub assembly..my well bearing is going out on me, if you have it, and the price is right..i might take it

Originally posted by CaptainJack
you happen to still have the front right hub assembly..my well bearing is going out on me, if you have it, and the price is right..i might take it

Those are taken, sorry.

just curious if you have the driver's front control arms, the guy wanting my car is looking for some for a fair price and is without the internet.

EDIT: what about axles got those, and any good?

Originally posted by DarkTalon
just curious if you have the driver's front control arms, the guy wanting my car is looking for some for a fair price and is without the internet. EDIT: what about axles got those, and any good?

I have the control arm, and axles too. The boot on the drivers side is ripped, but i can replace it for you. Pm me with an offer.

so how much for the whole back panel...drivers side...shipped to canada

PMed you

left reverse light cover may i have for a reasonable denomination?

Originally posted by NX112
left reverse light cover may i have for a reasonable denomination?

Those are on ebay.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8057823858&rd=1&sspagename=STRK%3AMESE%3AIT

If you have the interior side of the manual side mirror (both sides), the driver and passenger Kick Panels, and the trunk storage divider. Please PM me, or email me at mistical989@hotmail.com.

We can do everything over paypal because I'm currently in Afghanistan. I'll have my roomate recieve everything. I have his number if you need it also.

!!!!!!!!!!

Also looking for the Power Steering Tensioner/AC Tensioner. Offering 50.00 shipped for that. THAT IS THE MOST IMPORTANT THING.

im looking for a good hatch with glass and wiper assembly
mine is so rusted it makes me cry
and the full spoiler if it has one
looking for prices right now


wanna hook me up with some info and maby a pic or 2 at dec07@yahoo.com
or here works to thanks

reverse light covers do you have and how much?

Originally posted by NX112
reverse light covers do you have and how much?

$15 shipped? You do need the ones for the 95-96 right?

Sent you an email about suspension parts and a valve cover. LMK, thanks.

Originally posted by jay777
Sent you an email about suspension parts and a valve cover. LMK, thanks.

Didnt get your email. Send me a pm or resend please. I dont have the valve cover and I dont have the springs and struts.

have you mailed out my door handles yet dude? its been a long time now and no handles yet, just let me know i need them asap

how much for the fuel tank shipped?

92844 is the zip


-mitsuman
Repin The SoCal 2GNT'ers
mitsuman95@hotmail.com
AIM s/n : mitsuman95gs

still have the ECU?

do you still have the turn signal switch and how much shipped to 78363. thanks

Originally posted by ColtsNumba1Fan
have you mailed out my door handles yet dude? its been a long time now and no handles yet, just let me know i need them asap

Hey, i got them out of my car, i'll ship out tomorrow.

Originally posted by mitsuman
how much for the fuel tank shipped? 92844 is the zip -mitsuman Repin The SoCal 2GNT'ers mitsuman95@hotmail.com AIM s/n : mitsuman95gs

I actually was in socal last weekend (riverside and san diego). How fast do you need it? Maybe i can drop it off on my next visit. If not, then it'll probably be a lot for freight. Let me know what you want to do.

Originally posted by rydereclipse
still have the ECU?

ECU sold, sorry.

Originally posted by wantturbo
do you still have the turn signal switch and how much shipped to 78363. thanks

Are you talking about the on the steering column? If so, i do have it.

i got the rear upper control arms, but do you have the rear lower control arms? i actually just need the 1 for the passenger side.

I got it. Pm me with more info on what you need. The upper ones werent the ones you needed?

How bout the actual main wiring harness? Do you have also have the cam/crank sensors with round pin style connectors? I really need this stuff to help t/s my car and eliminate everything, ready to send paypal whenever.

Originally posted by XMasta19
How bout the actual main wiring harness? Do you have also have the cam/crank sensors with round pin style connectors? I really need this stuff to help t/s my car and eliminate everything, ready to send paypal whenever.

Harness is gone, cam sensor is gone also. I'll check on the crank sensor.

Im looking for the male fuel line fittings from the feed(pressure) line, the ones that screw into the rubber hoses on the fuel rail and fuel pump. Hacksaw them off or bolt cutter or whatever, just need those two fittings, say $15 shipped too 93277?

when are you gonna be in socal again? I need the drivers side front fender and door

i need the light dimmer switch how much shipped to 45414

$10 shipped? pm me back

Originally posted by ez
when are you gonna be in socal again? I need the drivers side front fender and door

I'll be in socal this weekend, dont think i have space for it though. I'm going to be crammed in a rsx with 4 other people. I can probably ship it to you for $100 though. Let me know

Is it a 5 speed, 420a enigne? If so do you still have the tranny? How much?

$10 shipped to my question?

Originally posted by Keith2172
$10 shipped to my question?

I dont know what you mean by the fittings. The fittings to the fuel rail i know of are the thing with the loop in it. Can you be more specific? I also have a 95 fuel system, your looking for the early model system right?

$10 shipped was to the dimmer.

How much for the hydralic arms for the hatch 45414

If you are looking straight down on the fuel rail, there is a rubber hose that bolts too the right side of the rail. That hose is approx. 6in. long. It has a female end and that attaches too a hardline that is attached to the firewall. The male fitting on the hard line is what I am looking for.

There is a second fitting of the same type under the car. If you pull the back seat and the access plate that allows you to see the top of the gas tank, you will see where the gas pump is mounted into the tank. Coming off the top of the pump bracket are two lines, one with a regular rubber hose clamped on (this is your return) and one that has a male fitting (the one I'm looking for) that threads into another hose like the hose up front.

I need both male fittings, I hope that this made more sense (I also hope that '95s have these same fittings, otherwise Im going to look like a major jackass)

If you can hacksaw these fittings off for me to use in fabricating my own fuel system, I'd appriciate it greatly.

Originally posted by 96TalonESi
How much for the hydralic arms for the hatch 45414

Mine are going out, dont think you want those.

Originally posted by Keith2172
If you are looking straight down on the fuel rail, there is a rubber hose that bolts too the right side of the rail. That hose is approx. 6in. long. It has a female end and that attaches too a hardline that is attached to the firewall. The male fitting on the hard line is what I am looking for. There is a second fitting of the same type under the car. If you pull the back seat and the access plate that allows you to see the top of the gas tank, you will see where the gas pump is mounted into the tank. Coming off the top of the pump bracket are two lines, one with a regular rubber hose clamped on (this is your return) and one that has a male fitting (the one I'm looking for) that threads into another hose like the hose up front. I need both male fittings, I hope that this made more sense (I also hope that '95s have these same fittings, otherwise Im going to look like a major jackass) If you can hacksaw these fittings off for me to use in fabricating my own fuel system, I'd appriciate it greatly.

The early system has the fuel filter in the engine bay, tell me if you see what you need in this picture.

nope, that won't do, thanks for the pic though, now I know :)

Hey, i got a notice from the city that i need to have my car removed from my yard by the end of the month. So if you need parts, make me a reasonable offer.

Heres a list of some of the parts I have left
Doors
Pass and Driver windows
seatbelts
seats
dashboard
gauge cluster
gauge bezel
trunk interior (grey)
diamond plated door mats
numeric narrowband a/f gauge
95 fuel rail modded for aftermarket fuel regulator
fuel injectors (140,xxx mostly highway, still works)
Carpet and trunk carpet, both in grey
Rear hub bearings
stock axles
stock header
Stock A pillar trim
3 gauge pillar pod
Battery tray
95 reverse lights
door sills
gas cap
spare jack
Rs calipers and rotors
Ac heater controls
AC condensor
Ac cooling unit
Heater blower
Window wipers
and other miscellaneous items you have in mind, heres your last chance.
Please make a reasonable offer, if its too low, i'll ask for more. But if i dont think its worth it then i dont want it to waste my time going outside in 100+ arizona heat and shipping it and only get a few bucks out of it. I'm very busy especially now that i started summer school, but i will consider all offers. Im sure you'll understand. And thanks for all your support so far!

let me get the trunk board and carpet if you have it still. Need the whole thing including the black hinges from the board that screws into that ledge in the car.

Also need screws for the top panels that screw into the hatch to fasten the panels, also if you have it the black fasteners that hold that ledge up, the pull stringy deal you know what Im getting at.

Also need the plastic covers that go on the side of the plastic kick panels on the side panels to cover the screws.

Would also like the screws that hold the plastic rear strut covers to the body. Should be 4 to each side.

I have paypal waiting please let me know, soon.