I need the gasket from my turbo to manifold, but dont want to wait for shipping and all that. Do any stock turbos that you know of have a t3/t4 configuration? Im thinking a supra? Ill just get it from a parts store.

Any help is appreciated.

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

What about the Mustang SVO?

thanks brutha, ill check it out

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

For some reason i think the SVO had a t3 style flange. Not sure though.

Edit: Yes it is a t3 turbo
http://projecthp.ford23.com/svo.html

Edit: if you get in a pinch try a ford dealer and ask them if they have a 01 ford powerstroke turbo inlet gasket. By the looks of the last one I looked at, I would venture to say it was a t3 or t4 flange.



Terry

i think some of the volvos also but not sure .

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

im going to try the ford dealership and see if they have the right one, I really appreiate the help Terry, thanks.

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Any luck?

I have previously bought a stamped stainless steel T3 gasket from the Ford dealer. I told them it was for a 1986 Thunderbird turbocoupe. That had a 2.3l four with T3 turbo. Some places will have it in stock and it will be about $7.

Corbin

'95 ESI-T
Now with more power and fewer leaks



Gimme fuel...Gimme fire...Gimme that which I desire

80s saabs also use the t3 gasket

The engine in my 280Z from a 1982 280ZX Turbo has a T3 gasket. It also has bolt retainer clips so they bolt don't rattle out.

RRE sells T3 gaskets also
http://www.roadraceengineering.com/flangesandgaskets.htm
Garrett T-3 Turbine Housing Inlet Gasket
Single layer stainless steel

they got these too
Garrett T-3 Turbine Housing Discharge Gasket

RRE is fast too they'll have you stuff in a day or two.

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?