I have been putting together a turbo kit for my 97 GS and need help finding more parts and putting together this car...I currently have a Garret T3/T4 60 Trim RB20 / Internal Gate V-Band, HKS ssqv, walbro 225 fuel pump, 12:1 FMU, and missing link, I just bought a new ramhorn manifold...I have the oil feed line but not the return line(I dont know where to return it either).I know I need a fmic(does anyone know of a good one to go with?) I am going to have custom exhaust for the downpipe out...I need help with fuel feeding I fear fuel cut. I certainly dont want to blow this motor up...I only have stock internals for right now. I also need help setting that up....what else do I need? I am aware of what all it takes to do a turbo set up but I cant find half the parts...and I want to do it close to right the first time...please help

You said you have a ramhorn manifold, dont tell me you bought the OBX manifold from ebay? You did, didnt you?

-MIKE-

Stroked 2.2L

=Dan=



98rs eclipse- Mods: BC2, C/F hood, custom turbo system consisting of a PTE SC50, turbosmart ultra gate (10psi), star FMIC and pipes, SFMU, HKS SSQV, 3" V-BAND downpipe from ATP, Zeitronix Wideband LCD displaying boost, egt and 02. *** SOLD and will be missed***

2006 gsxr 750- jardine gp1 exhaust, -1,+2 stealth sprockets, DID 525 chain, JD products pro TRE. 0-60 in a sneeze. ran a 10.8 avg 1/4 mile my first time to the track on street tires, stock swingarm and unstrapped.

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

The original poster said it was an turbo manifold. Their new ramhorn design. And there was talk asking if it was obx. I don't think that the map sensor goes on the exhaust manifold

doh!
um uh ok then dont tap it for an EGT

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

it is infact the OBX ram horn... I've heard bad stuff about OBX a well but I think I'll give it a try. where did you say I could get a fuel cut defender? I appreciate all of your help. I know I'm about the 100 billionth person to ask these questions. I'll let you know if the manifold doesnt work/fit.

Check the For Sale section and I believe that it is Velocita Paola that has them for sale.

Post up how the ramhorn fits and ANY issues you had with it. I'm sure lots of us would like a tubular manifold if there is no major fitment issues.

=Dan=



98rs eclipse- Mods: BC2, C/F hood, custom turbo system consisting of a PTE SC50, turbosmart ultra gate (10psi), star FMIC and pipes, SFMU, HKS SSQV, 3" V-BAND downpipe from ATP, Zeitronix Wideband LCD displaying boost, egt and 02. *** SOLD and will be missed***

2006 gsxr 750- jardine gp1 exhaust, -1,+2 stealth sprockets, DID 525 chain, JD products pro TRE. 0-60 in a sneeze. ran a 10.8 avg 1/4 mile my first time to the track on street tires, stock swingarm and unstrapped.

I'm supposed to receive the exhaust manifold tomorrow...but it will be a little bit before putting it on I may test fit it this weekend....but either way I will let you know how it fits and/or any problems I find wrong with it.

where can I get intercooling piping because I am wanting to run it different then the common kits sell...So I'll have to do it piece by peice instead of a kit? any suggestion?

-MIKE-

Stroked 2.2L

How much and what brand?

I already have an intercooler, its a sameside FMIC...but no piping. I was just wondering where I could get individual piping at....but how much do you want for the kit you have?

i know this has nothing to do with this topic but how do I get a picture of my car to show up with my message....I am going to test fit the manifold either tonight or tomorrow and will post pics and/or any problems that I have.

-MIKE-

Stroked 2.2L

>

I test fitted the manifold everything lined up great only thing I didnt like about it was the fact that I didnt get to keep it on there....without the rest of the kit. I was wondering also whats better to have? internal wastegate or external?

does anyone know where the suggest return oil line goes on the oil pan?

I can take a pic of where I ran my oil return after work for you!

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

I'd appreciate it... does anyone have the hahns portfueler system?