I have been searching for a little while and I can't seem to find where to buy accessories for the vortech sfmu. I know i could find them before the forum had the new design but now I can't find it. Can someone please tell me where I can get another ring and disk set etc for the vortech sfmu. I bought it used and originaly was not going to need anything except for what was in it, now I have a built bottom end and building my top so I need the other rings and disk for 40lb and higher injectors!

Umm, have you tried their website at all?

Mike D
-------------------------------------------------------------------------------------------------

It is down at the moment. All I can find at jegs and summitt are the an adapters, I need the rings and disk too.

summit has it . heres the link

http://store.summitracing.com/partdetail.asp?autofilter=1&part=VOR%2D6Z270%2D010&N=700+115&autoview=sku

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

Thanks alot, I guess I was just blind. I will be ordering this SOON!

hmm hate to tell you but I don't think those are all the discs you need. That looks like a regular FMU recalibration kit, I have one and it doesn't help my SFMU much since I can get the bigger discs.

Best thing to do is find a shop that can order it for you or call them up yourself and order it over the phone, I had to do that to get the dark spring, that's another thing the kit lacks the springs. then again the kit should have come with all that stuff I just had to buy a used one

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Yeah I bought mine for 100 used too!

I called them and ordered the Calibration kit and the Bleed valve and it was around $80. So if anyone in the future needs to find these, just call them.