I was reinstalling all my turbo stuff when I noticed something. I shook my Wastegate and it sounds like something was loose inside...It still holds the pressure so i think the spring is still intact...Is it safe to take it apart? Just unscrew all the philips at the top going around it or is that spring going to explode on me? Sorry for the n oob question, it just sounds weird, sounds like a small pebble just rolling around inside...

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

Take the screws out. Do your self a favor and mount it to the manifold first and back the adjustment screw all the way out. The spring is still going to force the top off the wastegate so hold it down tightly. This is obviously why i tell you to mount it on the car then take it apart.

Terry

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

yup tool mine apart also . the first time is shot like 10 feet . its a lot stronger than a sfmu cover .

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

nothing a little knocks from a rubber mallet wont loosen.

carefull with the screws.

have a clamp?

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for