Ok.. I posted this in someone elses thread... but thought it'd be best to start my own. I have a star stage ii kit... (T3/T4 Turbonetics turbo) and I need the connection that goes from the turbo oil drain hole to the hose that runs to the oil pan... anyone know where I can get it.. or waht I should be lookin for?

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

what do you have exactly? You have the star turbo right? So I am guessing you need the flange and the NPT fitting for the hose.

I do have a spare, its on my talon since i installed the return setup backwards way back when. I can install the original oil pan i have and sell you that one.




The nipple for the hose is a common fitting from home depot. I do have that as well.

Terry

I have the flange and rubber hose that get installed on the oil pan. I need the part that connects on the bottom of the turbo. It's been a long time since I looked at it.. maybe I'll have to unbolt the turbo and look at it. If you have what I need I'm definitely interested. I also need the oil feed lines (see my replies to the posts below). How much do u want for it?

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

I will sned you a PM, I have the feed line and return flange.

just to clarify, I need the flange that connects here:



Also, I need all the adapters for the oil feed line so its ends up being 1/8" M on both ends. Thanks man.. I'll be looking for that PM.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?