Hi, im about to finish my custom turbo kit and now I need to choose my fuel setup. Im afraid to run the stock injector with 8 psi and a fmu 12:1. I know it will be 100psi+. If I buy #310-315cc... injector and just put maybe a 10 or 8:1 disk it will be better right? For the idle, I think I cannot ajust the idle pressure with fmu ? Should I just wait and buy and sfmu with 315cc instead ? I just want to be safe and I dont think to run higher than 8-9 psi of boost.

thanks

IF you are going to stay at that and want to run safe but rich then you can stick with the 12:1 fmu, but if you want to up the boost later or if you want to run right and not rich all the time then get the sfmu. Others will tell you to consider the Megasquirt. Its up to you, the simplest fuel set up is the fmu, better option is the sfmu, and best is MS.

Thx for reply, but If I use a 10:1 or 8:1 disk with these injectors ill no longer be rich ?

if you run bigger injectors your going to need a sfmu . a fmu wont cut it .

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels